Lube Adhesive & Engineering Co.
Lube Adhesive & Engineering Co.
Ghodasar, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL

Anabond & Threebond Products

Leading Wholesale Supplier of anabond 412 bearing retainer and anabond tuffseald 2p pourable polysulphide sealant from Ahmedabad.

ANABOND 412 BEARING RETAINER

ANABOND 412 BEARING RETAINER
  • ANABOND 412 BEARING RETAINER
  • ANABOND 412 BEARING RETAINER
  • ANABOND 412 BEARING RETAINER
Get Best Quote
Approx. Price: Rs 115 / NOSGet Latest Price

Product Details:

Minimum Order Quantity25 NOS
BrandANABOND
ColorRED
MaterialLIQUID
Grade StandardBEARING RETAINING
Packaging TypeBOTTLE
Usage/ApplicationFOR HIGH STRENGTH
Weight50 ML & 250 ML

HIGH STRENGTH BEARING RETAINERS,    COLOR RED,                                        CURING TIME : 10 TO 15 MINUTES         SHEAR STRENGH : 200-250 KG/CM2 VISCOSITY : 275-325 CPS                         GAP FILLED 0.175 MM 
SERVICE TEMPERATURE : 060 TO 150 
Request
Callback


Additional Information:

  • Item Code: 412
  • Production Capacity: AHMEDABAD
  • Delivery Time: WITHIN 2 DAYS
  • Packaging Details: 50 ML & 250 ML
Yes! I am Interested

Anabond Tuffseald 2P Pourable Polysulphide Sealant

Anabond Tuffseald 2P Pourable Polysulphide Sealant
  • Anabond Tuffseald 2P Pourable Polysulphide Sealant
Get Best Quote
Approx. Price: Rs 260 / KgGet Latest Price
Anabond Tuffseald 2P Pourable Polysulphide Sealant  Technical Data Sheet May 2008  Two part Polysulphide Pourable sealant   Anabond POURABLE Polysulphide  Anabond  Pourable Polysulphide sealant is a universally usable for concrete joint sealant.  This is two part system.  After mixing Resin and Hardener, the polymerization is initiated at room temperature, which proceed further until it is cured.  Features  • It has good adhesion properties. • It is mainly used as a fuel resistant sealant.  Typical Use   • Concrete joint sealant in airport • Construction sealant   Application      By Manual:  Hardener is to mix with Resin and stir gently to get uniform colour mix. 
Anabond Tuffseald 2P Pourable Polysulphide Sealant Technical Data Sheet May 2008 Two part Polysulphide sealant  Product description (average values)  Anabond POURABLE Polysulphide (Part A – Resin)  Colour       : Off-White Viscosity @ 30°C, cPs    : 50000±4000 Specific gravity @ 30°C    : 1.35±0.02 Shelf life, unopened     : 9 months Disposal      : Disposal procedures approved by         national local authorities   Anabond POURABLE Polysulphide (Part B– Resin)  Colour       : Brown Viscosity @ 30°C, cPs                                        :           66000±2000 Specific gravity @ 30°C    : 1.50±0.02 Shelf life, unopened     : 9 months Disposal      : Disposal procedures approved by         national local authorities  Storage condition   The resin and hardener should be stored at a temperature not exceeding 40°C in original sealed containers.  At higher storage temperature the storage life would decrease sharply.  The resin and hardener containers should not be exposed to sunlight to avoid premature gelation.  Packaging  Resin (Part A) 920 gms of material into the 1 litre wide mouth tin container  Hardener (Part B) 80 gms of material into 100 ml tin container Anabond Tuffseald 2P Pourable Polysulphide Sealant Technical Data Sheet May 2008 Two part Polysulphide sealant  Sl. No. Properties Test Method Tested Values 1. Colour Resin Hardener ATM-R002   Cream Black 2. Specific gravity Resin(Part A) Hardener(Part B) ATM-R004  1.359 1.50 3. Viscosity @ 30±1°C, cPs Resin(Part A) Hardener ATM-R006  50000 66000 4. Mixing ratio (R:H) (By weight) -- 92:8 5. Pot life @ 30°C, minutes ATM-R007 464 6. Curing schedule @ RT, days  7 7. Volatile content, % 150°C, 2 hours Resin Hardener  °C, 2 hours A B ATM-R009   0.62 0.73 180 12.13 4.42 8. Tensile strength, kg/cm2 ATM-R020 3.80 9. Elongation, % ATM-R020 500 10. Hardness Shore A ATM-R069 12 11. Lap shear strength, kg/cm2 Aluminium – Aluminium Ms – MS  ATM-R022  4.0 4.6
Anabond Tuffseald 2P Pourable Polysulphide Sealant Technical Data Sheet May 2008 Two part Polysulphide sealant  Mix ratio  System      Parts by weight  Anabond POURABLE Polysulphide (Part A)  92 Anabond POURABLE Polysulphide (Part B)  8  Processing  Data (As mixed)  Pot life     : 7 hours minimum (@30±°C)  
Request
Callback


Additional Information:

  • Delivery Time: WITHIN WEEK
  • Packaging Details: 4 KG PACK
Yes! I am Interested
X

Explore more products



Reach Us
Vilesh Mistry (Proprietor)
A/16, Vidya Gauri Society, Cadila Road Ghodasar.
Ahmedabad- 380050, Gujarat, India



Call Us


Send E-mailSend SMS