Call 08048716426 76% Response Rate

our range

HEAT SINK COMPOUND

Offering you a complete choice of products which include anabond 652c heat sink compound, fasto tg 100 heat sink compound and anabond 652c heat sink compound 1kg pack.
  • Anabond 652C Heat Sink Compound
  • Anabond 652C Heat Sink Compound
Anabond 652C Heat Sink Compound

Anabond 652C Heat Sink Compound

Rs 70  / NumberGet Best Price

Minimum Order Quantity: 25 Number

Product Brochure

Packaging Size50,100 1 KG
Packaging TypeDABA & TUBE PACKING
Packingtube
BrandAnabond
Size0-5Kg, 50 gm, 10-15Kg
ColorMilky white
Usage/ApplicationIndustrial
Materialnon curing silicone
Thermal Conductivity35 c w mk 0,399 / 66 c 0.403 / 86 c 0,437
PRODUCT DESCRIPTIONTechnology SiliconeChemical type Non curingAppearance Smooth pasteColour Milky whiteApplication Heat transfer / Heat sink compoundAnabond 652C is a heat transfer compound that isformulated with polydimethyl siloxane fluids incombination with metallic oxide fillers to provide superiorthermal conductivity. It is designed for use as a heattransfer compound in both the electrical, anelectronic industries, and is characterized by its highthermal conductivity, high dielectric constant, and highdissipation factor, Anabond 652C is an ideal material foruse in thermocouples, power diodes, transistors, semiconductors, etc. Anabond 652C exhibits excellent longterm storage stability, without oil separation.
Typical PropertiesSpecific gravity at 30 ± 2°CATM*-R004 (JIS* K6820) g/cc 2.00 – 2.50
Weight loss at 200±5°CATM-R009 1.0 – 5.0
Viscosity at 300C,ATM R006 (JIS K6820) poise 52,000 –62,000
Flash Point Refer MSDS
Electrical PropertiesDielectric Strength kV/mm 7.2Volume resistivity ohms-cm 8.79 X 10Dissipation factor• at 100 Hz• at 1.0 Hz0.2 X 100.025
Dielectric constant• at 100 Hz• at 1.0 HzkV/mm 4.85.0Arc resistance Sec 77
Thermal PropertiesThermal conductivity• at 35 ºC• at 66 ºC• at 86 ºCW/mK0.3990.4030.437
Operating parametersApplication temperatureIn service temperatureShort exposureGeneral InformationThis product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selectedas a sealant for chlorine or other strong oxidizingmaterials.HandlingBefore handling, read product safety data sheets(MSDS) and container labels for safe use.
Directions for useSubstrate preparationSurfaces to be adhered or sealed should be free of dirt,oil and other contaminants. For best performancethe surface with a solvent such as isopropyl alcoholacetone or methyl ethyl ketonecloth.Method of applicationAdhesive/sealant can be applied dircollapsible tube.A plastic nozzle is supplied which can bedesired orifice and shape to facilitate application.The material may be applied by brushing, spraying, ordabbing the product on the surface to be lubricated orsealed thickness.Excess material can be easily wiped away withcloth or non-polar solventsStorageThe optimal storage condition is 8below or more than the temperature specified, hasimpact on the product properties.Material removed from containers may be contaminatedduring use. Do not refill the product to the container

Additional Information:

  • Delivery Time: within 2 days
  • Packaging Details: 50 gm & 100 Gm,1 KG PACK

View Complete details

get quoterequest a call back
  • Fasto TG 100 Heat Sink Compound
  • Fasto TG 100 Heat Sink Compound
  • Fasto TG 100 Heat Sink Compound
Fasto TG 100 Heat Sink Compound

Fasto TG 100 Heat Sink Compound

Rs 800  / NumberGet Best Price

Minimum Order Quantity: 5 Number

Product Brochure

BrandFASTO ADVANCE ADHESIVE
Model NumberFASTO TG 100
Packaging Size1 KG
Packaging TypeDABBA
Application IndustryELECTRICAL, Telecom
Surface Of ApplicationMetal
Grade StandardIndustrial
StrengthHigh
Country of OriginMade in India
PRICE IS INCLUSIVE OF 18% GST.
Fasto TG100 is one part high performance siliconebased non curing thermally conductive paste. FastoTG100 is specially formulated for various applicationswhere heat transfer is very imported. Fasto TG100 isthick paste and can be easily applied with the helpspatula. Fasto TG100 has very good thermalconductivity with better electrical insulation andweatherability. Its performance at high temperature isalso excellent.TYPICAL APPLICATIONSFasto TG100 , thermally conductive paste, is very usefulwhere continuous heat transfer at elevated temperatureis required. It fills the air gap between contact surfaceand ensures quick heat dissipation. Fasto TG100 isgenerally used during assembly of LED lights and otherelectronic & electrical devices.PROPERTIES OF UNCURED MATERIALValueChemical type ProprietaryColour WhiteSpecific Gravity (g/ml) 1.93Thermal conductivity (W/m-k) 1.1Operating TemperatureContinuous (°C) -50 to 200Intermittent (°C) ~250Breakdown Voltage (kV/mm) > 5.1Shelf life (months) 12DIRECTIONS FOR USERemove all the rust, scale, dirt, dust, grease, oil, releaseagents, or other contaminants from the contact surfaces.Surfaces can also be cleaned using suitable Fastocleaner. Apply Fasto TG100 evenly with spatula suchthat no air remains between heat emitting surface andheat radiating contact surfaces. Apply Fasto TG100 in sufficient quantity and wipe out the excessive quantity.Excess quantity application is avoidable.Application temperature should be between 5°C and40°C and optimum temperature range is 15°C to 25°C.GENERAL INFORMATIONSAFETY PRECAUTIONSAvoid breathing of vapors. Forced local exhaust isrecommended to effectively minimize exposure. NIOSHapproved, organic vapor respirators and forced exhaustare recommended in confined areas, or when conditions(such as sanding, etc) may cause high vaporconcentrations.For safe handling of this product consult the MaterialSafety Data Sheet.StorageOptimal storage conditions are between 15°C and 25°C.Storage outside this temperature range can adverselyaffect product properties and may affect the stated shelflife.Packaging500 g, 1 kgLIMITATIONSThis product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selectedas a sealant against chlorine or other strong oxidizingmaterialsDATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidance only. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user’s responsibility todetermine the suitability of any of the products andmethods of use or preparation prior to use mentioned inour literature and furthermore the user’s responsibility toobserve and adapt such precautions as may beadvisable for the protection of personnel and property inthe handling and use of any of our products.

Additional Information:

  • Delivery Time: IMMEIDATE
  • Packaging Details: 1 KG & 5 KG,10 KG

View Complete details

get quoterequest a call back
Anabond 652c Heat Sink Compound 1kg Pack

Anabond 652c Heat Sink Compound 1kg Pack

Rs 1,125  / KgGet Best Price

Minimum Order Quantity: 5 Kg

Product Brochure

MaterialHEAT SINK COMPOUND
BrandANABOND
Surface FinishingGOOD
ColorWHITE
Control GearON CURING
Ip Codemetallic oxide fillers
Corrosion ResistanceNO
FeaturesGOOD
Packaging TypeDABAA
Rating0.399
Tensile StrengthNORMAL
Usage/ApplicationLED & PCB HEAT TRANSFER APPLICATION

ABOVE PRICE IS INCLUDING OF 18% GST.

PRODUCT DESCRIPTIONTechnology SiliconeChemical type Non curingAppearance Smooth pasteColour Milky whiteApplication Heat transfer / Heat sink compoundAnabond 652C is a heat transfer compound that isformulated with polydimethyl siloxane fluids incombination with metallic oxide fillers to provide superiorthermal conductivity. It is designed for use as a heattransfer compound in both the electrical, anelectronic industries, and is characterized by its highthermal conductivity, high dielectric constant, and highdissipation factor, Anabond 652C is an ideal material foruse in thermocouples, power diodes, transistors, semiconductors, etc. Anabond 652C exhibits excellent longterm storage stability, without oil separation.
Typical PropertiesSpecific gravity at 30 ± 2°CATM*-R004 (JIS* K6820)g/ccWeight loss at 200±5°C2.00 – 2.501.0 – 5.052,000 –62,000ATM-R009%Viscosity at 300C,ATM R006 (JIS K6820)poiseFlash Point
Dielectric Strength kV/mm 7.2Volume resistivity ohms-cm 8.79 X 10Dissipation factor• at 100 Hz• at 1.0 Hz0.2 X 100.025Dielectric constant• at 100 Hz• at 1.0 HzkV/mm 4.85.0Arc resistance Sec 77
Operating parametersApplication temperatureIn service temperatureShort exposureGeneral InformationThis product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selectedas a sealant for chlorine or other strong oxidizingmaterials.HandlingBefore handling, read product safety data sheets(MSDS) and container labels for safe use.Directions for useSubstrate preparationSurfaces to be adhered or sealed should be free of dirt,oil and other contaminants. For best performancethe surface with a solvent such as isopropyl alcoholacetone or methyl ethyl ketonecloth.Method of applicationAdhesive/sealant can be applied dircollapsible tube.A plastic nozzle is supplied which can bedesired orifice and shape to facilitate application.The material may be applied by brushing, spraying, ordabbing the product on the surface to be lubricated orsealed thickness.Excess material can be easily wiped away withcloth or non-polar solventsStorageThe optimal storage condition is 8below or more than the temperature specified, hasimpact on the product properties.Material removed from containers may be contaminatedduring use. Do not refill the product to the containerTechnical Data SheetRevised on Feb’ 2015Revision no. : 01, – British StandardPage 1 of 2???C 10 to 40???C -50 to +200???C 220cleanalcohol,or with coarse lint freedirectly from itscut to thea dry0C to 300C. StoragecontainerKeep the container tightly closed when not in use.If additional information is required, please contact ourlocal customer service representative.Shelf lifeWhen stored at or below 300C, in the original unopenedcontainers, this product has a shelf life offrom the date of manufacture.



Additional Information:

  • Delivery Time: IMMEDIATE
  • Packaging Details: 50GM/100GM/1 KG.

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES