Lube Adhesive & Engineering Co.

ABOVE PRICE IS INCLUDING GST 18%.
High-performance grease for plastic/plastic, plastic/metal and rubber/metal combinations involving slow to medium-fast movements and light to medium loadingsFeatures • High oxidation resistance • Low evaporation • Wide service temperature range, -50 to +180 °C (-58°F to 356°F) • Good low-temperature performance • Low coefficient of friction • Good corrosion protection • Excellent compatibility with most plastics and rubbers COMPOSITION • Silicone base oil • Lithium complex thickener • EP additives • Solid lubricants Applications Especially suited for the low-friction operation of most rubber or plastic parts, such as bearing bushings, gears and chains; sealing rings, sliding tracks and switches; and flexible control cables, which are typically found in Bowden cable control systems, electric motors and gearboxes, household and garden appliances, automotive brake systems, and automotive clutch systems.Description MOLYKOTE® PG-54 Plastislip is a special silicone-oil-based grease with a wide temperature range and good high-pressure and corrosion protection properties. It is designed for the longterm lubrication of metal/plastic, plastic/plastic and reinforced rubber/oil-resistant and non-oil-resistant combinations with high softener content. How to use Apply to clean, dry substrates using conventional grease application methods (e.g., brush, grease gun or automatic feed).Typical properties Specification writers: These values are not intended for use in preparing specifications. Please contact your local MOLYKOTE® sales representative prior to writing specifications on this product. Standard* Test Unit Result Color White Consistency, density, viscosity DIN 51818 NLGI consistency class 2-3 ISO 2137 Worked penetration mm/10 245-275 ISO 2811 Density at 20°C (68°F) g/ml 1.02 DIN 51562 Base oil viscosity at 25°C (77°F) mm2/s 200 Temperature Service temperature °C -50 to +180 °F -58 to + 356 ISO 2176 Dropping point °C >250 °F >482 ASTM D147880 Low temperature torque at –50°C (-58°F) Initial breakaway torque Nm <120x10-3Torque after 20 minutes running time Nm <90x10-3 DIN 51805 Kesternich method Flow pressure at -50°C mbar <800 Resistance, Corrosion DIN 51808 Oxidation resistance, pressure drop after 100h and 99°C bar 0.1 DIN 51802 SKF-EMCOR corrosion protection 0-1 Coefficient of friction Steel ball against plastic surface (POM) ∅ ball = 12.7 mm, load 0 6.3N, v = 10 mm/s, running time 24h µ <0.04 * DIN: Deutsche Industrie Norm. ISO: International Standardization