Lube Adhesive & Engineering Co.

ABOVE PRICE IS INCLUDING GST. 18%
High-load-carrying, metal-free lubricant for anti-seize and lubricating applications.
Features • High load-carrying capacity • Good corrosion protection • Nonmetallic formulation • Wide service-temperature range • Low and constant coefficient of friction • No intentional polytetrafluoroethylene (PTFE) or per- and polyfluoroalkyl substances (PFAS)Benefits • Facilitates disassembly, even after extended periods and after demanding and unfavorable conditions of service • Metal-free formulation avoids fastener brittleness or environmental contamination • With a coefficient of friction similar to oiled bolts, tightening torques can be calculated and applied uniformly, even upon repeated loosening and tightening, aiding in: o Uniform clamping force on flanges, valves, housings, etc. o Increased safety against bolt fractures o Increased safety against loosened screws due to vibrationComposition • Solid lubricants, synthetic oil, thickener and adhesion promoterApplications MOLYKOTE® P-74 Assembly Paste is suitable for assembly and fitting of a wide variety of threaded connections, such as bolted connections, sliding contact bearings, linear sliding guides, splined shafts, press-fit joints, exhaust bolts, spark plug threads, flanges and flange seals, door hinges, and brake mechanisms.How to use Clean threads of metal surfaces to remove dirt. Apply paste liberally by hand, gun or centralized lubrication system. For optimum performance, do not mix with other lubricants.Typical properties Specification writers: These values are not intended for use in preparing specifications. Please contact your local MOLYKOTE® sales representative prior to writing specifications on this product. Standard(1) Test Unit Result Color Grayish black Physical form Paste CTM 191 Unworked penetration 280-310 Density at 68°F (20°C) g/mL 1.21 Service temperature range as paste °F (°C) -40 to 392 (-40 to 200) as dry lubricant(2) °F (°C) 2,732 (1,500) DIN 51 350 pt. 4 4-ball weld load N 4,800 SRV oscillating wear tester, 300 N load, 1,000 µm elongation, 20 Hz, 194°F (90°C), duration min 90 Coefficient of friction M12, 8.8, blackened surface CTM 1153 Thread/head µ/µ 0.14/0.08 CTM 394 Press-fit test µ 0.12 Corrosion protection ISO/R 1456 Salt spray test, at 50 µm h 140 DIN 51 802 SKF-Emcor method degree of corrosion 2 (1)CTM: Corporate Test Method; copies of CTMs are available on request. DIN: Deutsche Industrie Norm. ISO: International Organization for Standardization. (2) Some of the raw materials still act as separating agents at 2,732°F (1,500°C).