Call 07942838759 81% Response Rate

our range

Mould Release Silicone Spray

Leading Wholesale Supplier of afra silicone spray 888, afra anti spatter spray, maaxsil 414 mould release silicone spray, tstar 550 silicone mold spray, tstar 500 gold galvanize spray and maax mould cleaner from Ahmedabad.
  • Afra Silicone Spray 888
  • Afra Silicone Spray 888
  • Afra Silicone Spray 888
  • Afra Silicone Spray 888
Afra Silicone Spray 888

Afra Silicone Spray 888

Rs 124  / NumberGet Best Price

Minimum Order Quantity: 24 Number

Product Brochure

Usage/ApplicationIndustrial
FormSPRAY
MaterialLIQUID
Packaging TypeBottle
Packaging Size250 GM / 429 ML
Model/Grade888
Temperature-40 TO 200
Shelf Life24 MONTH
Quantity Per Pack24 NO
GST 18% INCLUDING.
Afra® Heavy Duty Silicone Spray, Grade 888 Afra® Heavy Duty Silicone Spray, Grade 888 is a universal, multi-purpose Silicone based aerosol preparations suitable for mold release, lubrication and as a coating. As a mold release, it finds use as a mold release in Injection Molding operations of plastics, rubber and several thermoplastics, as a release agent in metal castings and foundry operations and casting of waxes and resins. It is also suitable for lubrication of plastic and rubber components of machinery, automobiles, conveyors, belts and similar equipment as a clean, non-toxic, weather and moisture proof lubricant.
Key Features Free from chlorinated solvents, Class I & Class II Ozone Depleting substances Special propellant gas with optimized propane-butane ratio and free from un-saturates Unique combination of ingredients and valve design enables a fine mist spray for optimized application on moulds Wide serviceable temperature of sprayed film, from -40 to 200°C, enables use on hot and cold moulds and components Non toxic, colorless and generally odorless. Suitable for incidental food contact Plastic safe solvent enhances compatibility with most plastic substrates Non-oxidizing, non-gumming lubricant and extremely water-repellant, weather resistant in nature.
Typical Properties Parameters/ Grades Grade 888 Active Ingredient DM Silicone Serviceable Temperature of sprayed oil film, °C -40 to 200 Specific Gravity of bulk, 25°C 0.75 Spray Rate, 53±3 °C, g/min 65-80 Filled can pressure, 53±3 °C, psig 75-110 Net Contents per can, g / ml 250g/429ml
LimitationsArticles molded with Silicone based mold release preparations may not be suitable for post molding operations such as painting, printing, plating, metallizing, gluing etc. Silicone that may transferred to the molded article may prevent adhesion on the coating material to the article. Limitations Silicones make surfaces slippery. Use with caution. Application Afra® Heavy Duty Silicone Spray, Grade 888 is designed for use as Mold Release Agent s for most injection molded plastics, metals, resins, waxes etc. They also rejuvenate rubber, plastic, synthetic leather and vinyl surfaces by hiding scratches and producing a high shine. They find use as a light Lubricant for metal and plastic substrates in several home, medical, food, industrial and automotive applications.
Precaution during storage and useContents are highly flammable. The cans should be kept away from sources of heat and ignition. Do not spray on flame or ignited materials. The Cans are pressurized and should not be punctured, incinerated or exposed to severe damage. This may cause the can to burst violently. Use in a well-ventilated area and avoid excessive inhalation, eye or skin contact. Keep away from children. Store in a cool, dry and ventilated place below 50 ???C. The Cans should be used with in eighteen months from date of manufacture. Most Cans perform normally even after extended storage beyond the ‘best before date’ may affect the contents or the packaging components. Such can may be re-inspected and test run may be conducted to confirm acceptability.Packing & Transport InformationTwenty Four cans are packed in one transport worthy, corrugated carton. UN No. 1950, Class 2.1. Air- Transport (ICAO & IATA): Hazardous Pressurized Container Sea Transport (IMO & IMDG) : UN 1950 Class 2Information on Disposal of used CansAerosol Cans are designed for single use only and are hazardous even when apparently empty. The cans must be completely evacuated by pressing the valve so that negligible gas remains inside and then must be punctured to release the remaining gas vapor. This shall render the can to be non-hazardous and fit for disposal as per local environmental norms

Additional Information:

  • Delivery Time: IMMEDIATE
  • Packaging Details: 24 NO

View Complete details

get quote request a call back
  • Afra Anti Spatter Spray
  • Afra Anti Spatter Spray
  • Afra Anti Spatter Spray
Afra Anti Spatter Spray

Afra Anti Spatter Spray

Rs 145  / NumberGet Best Price

Minimum Order Quantity: 24 Number

Product Brochure

Unit Pack Size24 NO
Usage/ApplicationIndustrial
FormBOTTLE
MaterialSPRAY
Packaging TypeBottle
Packaging Size350GM
Shelf Life24 MONTH
Quantity Per Pack24 NO
Afra Anti-Spatter Spray, Grade 324AfraAnti-spatter Spray, Grade 324 is a non-silicone, non-flammable release preparation which prevents adhesion of spatter on welding tools and parts. It is also a nozzle maintenance aid, which prevents accumulation of spatter on nozzles and tips of welding torches. Such build up of spatter can lead to poor gas coverage and result in poor welds. The regular use of Afra Anti-spatter Spray, Grade 324 greatly improves weld quality and eliminates the need for chiseling and grinding activities on welded articles and substrates.Key Features Non-flammable preparation. Non-toxic, non-fuming in nature and does not promote corrosion on welded articles and substrates. Helps to maintain a clean nozzle and improve gas coverage. Eliminates build up of spatter and increases life of nozzles and tips. Avoids problems caused to poor gas coverage such as pitting, porosity and burn backs. Prevents loss of time on chiseling and grinding activities on welded articles and substrates. Free from silicones hence allows posterior painting of welded articles.Typical PropertiesParameters Afra Anti-spatter Grade 324 Active Ingredient Proprietary, non-toxic Serviceable Temperature of sprayed coating, C 0 - 280 Specific Gravity of bulk, 25C 1.29 Spray Rate, 533 C, g/min 130-160 Filled can pressure, 533 C, psig 110-145 Net Contents per can, g / ml 350g / 460ml
Method of useSpray on to parts / substrates which need protection from adhesion of spatter.
Technical Data SheetThe information and data contained in this datasheet is believed to be reliable. It is advised that the user/ buyer shouldindependently conduct tests and trials and establish usefulness prior to commercialization. No warranty or guarantee is expressedor implied for the usefulness of the product for any application whatsoever.Aerol Formulations P. Ltd An ISO 9001 Certified CPrecaution during storage and useThe cans should be kept away from sources of heat as contents are pressurized and should not be punctured, incinerated or exposed to severe damage. This may cause the can to burst violently.Use in a well-ventilated area and avoid excessive inhalation, eye or skin contact. Keep away from children. Store in a cool, dry and ventilated place below 50 C.The Cans should be used with in eighteen months from date of manufacture. Most Cans perform normally even after extended storage beyond the best before datemay affect the contents or the packaging components. Such can may be re-inspected and test run may be conducted to confirm acceptability.
Packing & Transport InformationTwelve cans are packed in one transport worthy, corrugated carton.UN No. 1950, Class 2.2 Aerosols, Non-Flammable. Air- Transport (ICAO & IATA): Hazardous Pressurized Container. Sea Transport (IMO & IMDG) : UN 1950 Class 2Information on Disposal of used CansAerosol Cans are designed for single use only and are hazardous even when apparently empty. The cans must be completely evacuated by pressing the valve so that negligible gas remains inside and then must be punctured to release the remaining gas vapor. This shall render the can to be non-hazardous and fit for disposal as per local environmental norms.

Additional Information:

  • Delivery Time: IMMEDIATE
  • Packaging Details: 325 GM MRP : 163.00

View Complete details

get quote request a call back
  • Maaxsil 414 Mould Release Silicone Spray
  • Maaxsil 414 Mould Release Silicone Spray
  • Maaxsil 414 Mould Release Silicone Spray
Maaxsil 414 Mould Release Silicone Spray

Maaxsil 414 Mould Release Silicone Spray

Rs 95  / pieceGet Best Price

Minimum Order Quantity: 24 piece

Product Brochure

BrandMaaxsil
Materialspray
Packaging TypeBottle
Packaging Sizecan
Packing Typebottle
State/FormAerosol
Model/Gradesilicone
Eco FriendlyEco Friendly
Colorclear
Gradesilicone grade
Size500 ml
Shelf Life2 year
Temperature250 C
Quantity Per Pack500 ml
Net Content300 gm
Payment Terms100% advance
Flash Point250 c
Sample Availableyes
Sample Policypaid basis
Usage/Applicationmold release agent
Surfacessmooth
ABOVE PRICE IS INCLUDING GST 18%
PRICE IS 500 ML PACK/
MAAX MAAXSIL 414Silicon Mould Release SprayPROPERTIES Resist to Heat Easy Release  Excellent Penetration & Lubricant Water Repellent Excellent Anti Sticking Property Easy to use Non Toxic & Eco FriendlyAPPLICATIONS As a Mould Release spray in Plastic Injection Moulding, Die casting ,Shell Moulding and Rubber Moulding An Anti-Spatter Spray for all type of welding process General purpose Cleaner cum Lubricant for Wood, Chains, Cables, Belts, Springs, etc.,SPECIFICATIONS Property MAAXSIL 414 Colour Clear Specific Gravity  25°C (g/cc) 0.95+0.02 Film Type Wet Flash Point in °C >250 Shelf life 2 Years Packing 550 Ml Spray

Additional Information:

  • Delivery Time: within 2 days
  • Packaging Details: 500 ML

View Complete details

get quote request a call back
  • TSTAR 550 SILICONE MOLD SPRAY
  • TSTAR 550 SILICONE MOLD SPRAY
  • TSTAR 550 SILICONE MOLD SPRAY
TSTAR 550 SILICONE MOLD SPRAY

TSTAR 550 SILICONE MOLD SPRAY

Rs 100  / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Usage/ApplicationIndustrial
FormSPRAY
MaterialMOLD RELEASE SPRAY
BrandINDIAN
Packaging TypeCan
Physical StateLiquid
Packaging Size550 ML (310GM)
Model/GradeTSTAR 550 SILICONE MOLD RELEASE SPRAY
ColorCLEAR
Temperature60 C
GST 18% INCLUDING IN ABOVE RATE.
Packaging Type Bottle
Brand TSTAR-550
Packaging Size (litres) 250 ml, 400 ml, 500 ml Can
Material Aluminium
Minimum Order Quantity 50 Number

Owing to the efforts of our dedicated team of professionals, we have been constantly engaged in offering the best quality Aerosol Non Silicone Sprays.

Product Description

 

Owing to the efforts of our dedicated team of professionals, we have been constantly engaged in offering the best quality Aerosol Non Silicone Sprays.

Additional Information:

  • Delivery Time: WITHIN TWO DAYS
  • Packaging Details: 550 ML (310GM)

View Complete details

get quote request a call back
  • TSTAR 500 GOLD GALVANIZE SPRAY
  • TSTAR 500 GOLD GALVANIZE SPRAY
  • TSTAR 500 GOLD GALVANIZE SPRAY
TSTAR 500 GOLD GALVANIZE SPRAY

TSTAR 500 GOLD GALVANIZE SPRAY

Rs 190  / PieceGet Best Price

Minimum Order Quantity: 50 Piece

MaterialGALVANIZE SPRAY
Packaging Size400 ML(300GM)
Packaging TypeCan
BrandTSTAR 500 COLD GALVANIZE SPRAY
ColorZINK
FormAerosol
Usage/ApplicationIndustrial Use
Sodium ContentNIL
AppearanceZINK
Boiling PointNIL
ABOVE PRICE IS INCLUDING GST 18%

Packaging Size 500ml
Packaging Type Bottle
Usage/Application Industrial Use
Brand Tstar Aerosol
Physical State Liquid
Shelf Life 1 Year
Minimum Order Quantity 10 Bottle

- Tstar 500 Cold Galvanizing Spray
The offered Cold Galvanizing Spray is highly appreciated for precise pH value, high effectiveness, eco-friendliness, accurate composition and long shelf life. In order to ensure quality, this spray is stringently tested on various parameters. We offer this spray to our clients in various quantities at highly competitive prices.



Additional Information:

  • Delivery Time: WITHIN TWO DAYS
  • Packaging Details: 400ML (300GM)

View Complete details

get quote request a call back
  • Maax Mould Cleaner
  • Maax Mould Cleaner
Maax Mould Cleaner

Maax Mould Cleaner

Rs 270  / PieceGet Best Price

Minimum Order Quantity: 32 Piece

Product Brochure

Packaging Size500ml
BrandRevachem
Usage/ApplicationIndustrial
Packaging TypeCan
Physical StateLiquid
FormLIQUID SPRAY
Model Name/NumberMAAX MOULD CLEAN
Net Content500 ML
Shelf Life15 MONTH
Country of OriginMade in India
ABOVE PRICE IS INCLUDING GST 18%.
MAAX▪MOULD CLEAN High Performance Cleaner & Degreaser DESCRIPTION  MOULD CLEAN is a special grade cleaner and degreaser for all types of Industrial cleaning purpose. It has been manufactured from specially selected solvent incorporated with synthetic engineered fluids which provides Superior Cleaning of oil, grease, dirt, wax, and light adhesive particles. PROPERTIES  High performance mould cleaner & degreaser.  Completely evaporates.  Leaves no residue.  Non-toxic and non-staining.  Eco-friendly and odour free.  Safe and easy to apply. APPLICATIONS  Auto Components, Bearings, Castings, Chains, Chucks, Compressors, Cylinders, Dies, Drill rods, Engines, Fasteners, Forgings, Impellers, Machinery, Measuring Instruments, Moulds, Pipes, Piston, Shafts, Spindles, Tanks, Tools, Valves and Vessels. Electro Mechanical Assembly, Contacts, Terminals, Wire rope, Relay Switches and Generators. SPECIFICATIONS Property MOULD CLEAN Colour Clear Density@ 15°C (g/cc) 0.72±0.02 Pour Point -30°C Evaporation percentage 100 Shelf Life 18 Months Packing 500 ml Spray 

Additional Information:

  • Delivery Time: READY STOCK
  • Packaging Details: 500 ML

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES