Lube Adhesive & Engineering Co.

Product Description Anabond 341 is a single component dimethacrylate ester based fast curing anaerobic adhesive system specially designed for locking and sealing of threaded pipes and fittings and it is used to seal against water, oil and most common organic chemicals. The product gets polymerized when confined between closely mating metal surfaces in the absence of air and prevents loosening and leakage from shock and vibration. The product exhibits good temperature performance, chemical resistance and lubricating property. Properties of uncured material Curing performance The product cures when confined in the absence of air between closed fitting metal surfaces. The curing time is influenced by the gap between the surfaces, the kind of metal, surface treatments and temperature. assembly can be subjected to limited functional cure. Although functional cure is developed in a relatively short time, curing continues for at least 24 hours before full properties are developed. tested according to ATM*-R031 (ISO 10964) Handling cure at 30 ± 2°C, min M10 Chrome plated steel bolts & Nuts Functional cure at 30 ± 2°C, h Full cure at 30 ± 2°C, h Specific Gravity at 30°C, ATM-R004 *(JIS K6820) Viscosity at 30°C, Brookfield DV-II+, Spindle 4, speed 100 rpm, cP, ATM-R006 *(ISO 2555) 1400 Flash point refer MSDS Chemical Type Dimethacrylate ester Appearance Medium viscous liquid Cure Anaerobic Application Thread Sealing Strength Low Colour Green Anabond® 341 International Organization for Standardization, JIS – Japanese Industrial Standard Anabond 341 is a single component dimethacrylate ester based fast curing anaerobic adhesive system specially designed for locking and sealing of threaded seal against water, oil . The product gets polymerized when confined between closely mating metal surfaces in the absence of air and prevents loosening and leakage from shock and vibration. The ture performance, chemical resistance and lubricating property. The product cures when confined in the absence of air The curing time is influenced by the gap between the surfaces, the kind of metal, surface treatments and temperature. The limited test after Although functional cure is developed in ing continues for at least 24 hours before full properties are developed. Curing R031 (ISO 10964). Operating Parameters Properties of cured material Cured for 24 hours at 30±2 °C, tested according to ATM-R031 (ISO 10964). Pressure resistance Cured for 24 hours at 30±2 °C, tested according to ATM-R035 (IS 13055). General information Before handling read product safety data sheet and container label for safe use. This product is not recommended for use in pure oxygen or oxygen rich systems and not be selected as a sealant for chlorine or other strong oxidizing materials To prevent the product from clogging in the nozzle, do not allow the tip to touch the metal surfaces during application. Do not return the used product back to the original container as it may be contaminated Where aqueous washing systems are used to clean the surfaces before bonding, it is important to check the compatibility of the washing solution with the adhesive.
In some cases these aqueous washes can affect the cure and performance of the adhesive The product is not normally recommended for use on plastics, particularly thermoplastic materials where stress cracking of plastic could result. Users are recommended to check the compatibility of the product with such substrates. Directions for use Substrate preparation All surfaces must be clean and dry For best results degrease the fittings solvent and allow it to dry before applying the adhesive. If the metal surface is inactive or curing speed is slow use activator, Anabond Ekaprime 021. ds.

ABOVE PRICE INLUCLUDING GST 18%
We are dedicatedly involved in providing an excellent quality array of ANR142 Adhesive Sealant, for catering the various needs of our clients.

Details:

• These are anaerobic speciality formulations for pipe joints/fittings (pneumatic and hydraulic) applications.
• They are designed to be used for pipe joints, pneumatic fittings and can be used in place of teflon tape.

Salient Features & Benefits:

• Seals hydraulic and pneumatic threaded fittings
• Immune to fuels, oil, solvents and most chemicals
• Eliminates use of teflon tape
• Used for high pressure threaded joints
• Ensures an extremely durable chemical resistant seal

ABOVE PRICE IS CLUDING GST 18% .

leakage and loosening the joints due to vibration. - Immune to oils, solvents and a host of process fluids,Gap Filling 0.50MM - Service Temperature -50 to 200 Deg - Curing Time handling- 10-15 min,Functional 12 Hrs. - Product Colour White
Gap Filling 0.50MM - Service Temperature -50 to 200 Deg - Curing Time handling- 10-15 min,Functional

ABOVE PRICE IS INCLUDING OF GST 18%

With a firm commitment to quality, we are involved in offering a wide ambit of Adhesive Sealant.

Details:

• These are anaerobic specialty formulations for pipe joints/fittings (pneumatic and hydraulic) applications.
• They are designed to be used for pipe joints, pneumatic fittings and can be used in place of teflon tape.

Salient Features & Benefits :

• Seals hydraulic and pneumatic threaded fittings
• Immune to fuels, oil, solvents and most chemicals
• Eliminates use of teflon tape
• Used for high pressure threaded joints
• Ensures an extremely durable chemical resistant seal

ABOVE PRICE IS INCLUDING GST 18% 
PRODUCT DESCRIPTION LOCTITE® SI 596 RED provides the following product characteristics: Technology Silicone Chemical Type Acetoxy silicone Appearance (uncured) Red homogeneous pasteLMS Components One component - requires no mixing Thixotropic Reduced migration of liquid product after application to substrate Cure Room temperature vulcanizing (RTV) Application Gasketing or Sealing Flexibility Enhances load bearing & shock absorbing characteristics of the bond area. Specific Application Gasket dressing Specific Benefits Good temperature resistance.LOCTITE® SI 596 RED is used for gasketing and sealingapplications for both plant maintenance and small, medium, and large-sized OEM. It is specially formulated to meet the low silicone volatiles requirements of the automotive industry for 315°C flange sealants. As a formed-in-place gasket/sealant, LOCTITE® SI 596 RED has been designed to give outstanding performance in typical automotive gasketing applications including valve covers, rocker covers, oil pans, water pumps, end seals, intake manifolds, and rear axle housings. This product is also used as a sealant and adhesive for assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting, and heating elements in electrical appliances. This product is typically used in applications up to 315 °CTYPICAL PROPERTIES OF UNCURED MATERIALSpecific Gravity @ 25 °C 1.05 Extrusion Rate, g/min: Pressure 0.62 MPa, time 15seconds, temperature 25 °C: Semco Cartridge ≥250LMS Flash Point - See SDS Odor Acetic AcidCured for 7days @ 25 °C / 50% RHPhysical Properties: Shore Hardness, ISO 868, Durometer A ≥18LMS Elongation, ISO 37, % ≥300LMS Tensile Strength, ISO 37 N/mm² ≥1.5LMS (psi) (≥217) Cured for 14days @ 25°C 180° Peel Strength : Aluminum N/mm ≥1.73LMS (lb/in) (≥9.88) Steel N/mm ≥1.73LMS (lb/in) (≥9.88) TYPICAL ENVIRONMENTAL RESISTANCE Cured @ 25 °C / 50±5 % RH for 7days, tested @ 25 °C, 3.2 mm thick film Heat Aging Aged at temperature indicated and tested @ 22 °C Week(s) @ 204 °C 1 2 4 8 Shore Hardness, ISO 868, Durometer A 29 28 25 22 Tensile Strength, ISO 527-3, N/mm² 2.0 2.2 2.3 1.9 Elongation, ISO 527-2, % 370 450 490 500 Week(s) @ 260 °C 1 2 4 7 Shore Hardness, ISO 868, Durometer A 23 16 15 17 Tensile Strength, ISO 527-3, N/mm² 1.3 0.7 0.4 0.3 Elongation, ISO 527-2, % 520 440 280 210 Week(s) @ 316 °C 1 2 3 Shore Hardness, ISO 868, Durometer A 48 64 82 Tensile Strength, ISO 527-3, N/mm² 1.4 1.6 1.5 Elongation, ISO 527-2, % 175 70 25 At 260°C, softening is due to reversion and will occur regardless of how the sealant is cured. For flange sealing, this softening is usually an attribute. At 315°C, hardening is due to thermal rearrangement of the polymer and also oxidation. Oxidation is retarded when the product is used as a flange sealant.