View Mobile No.

our range

Polysulphide Sealant

Our range of products include anabond tuffseald 2p pourable polysulphide sealant.
Anabond Tuffseald 2P Pourable Polysulphide Sealant

Anabond Tuffseald 2P Pourable Polysulphide Sealant

Rs 260  / KgGet Best Price

Minimum Order Quantity: 20 Kg

Product Brochure

Anabond Tuffseald 2P Pourable Polysulphide Sealant  Technical Data Sheet May 2008  Two part Polysulphide Pourable sealant   Anabond POURABLE Polysulphide  Anabond  Pourable Polysulphide sealant is a universally usable for concrete joint sealant.  This is two part system.  After mixing Resin and Hardener, the polymerization is initiated at room temperature, which proceed further until it is cured.  Features  • It has good adhesion properties. • It is mainly used as a fuel resistant sealant.  Typical Use   • Concrete joint sealant in airport • Construction sealant   Application      By Manual:  Hardener is to mix with Resin and stir gently to get uniform colour mix. 
Anabond Tuffseald 2P Pourable Polysulphide Sealant Technical Data Sheet May 2008 Two part Polysulphide sealant  Product description (average values)  Anabond POURABLE Polysulphide (Part A – Resin)  Colour       : Off-White Viscosity @ 30°C, cPs    : 50000±4000 Specific gravity @ 30°C    : 1.35±0.02 Shelf life, unopened     : 9 months Disposal      : Disposal procedures approved by         national local authorities   Anabond POURABLE Polysulphide (Part B– Resin)  Colour       : Brown Viscosity @ 30°C, cPs                                        :           66000±2000 Specific gravity @ 30°C    : 1.50±0.02 Shelf life, unopened     : 9 months Disposal      : Disposal procedures approved by         national local authorities  Storage condition   The resin and hardener should be stored at a temperature not exceeding 40°C in original sealed containers.  At higher storage temperature the storage life would decrease sharply.  The resin and hardener containers should not be exposed to sunlight to avoid premature gelation.  Packaging  Resin (Part A) 920 gms of material into the 1 litre wide mouth tin container  Hardener (Part B) 80 gms of material into 100 ml tin container Anabond Tuffseald 2P Pourable Polysulphide Sealant Technical Data Sheet May 2008 Two part Polysulphide sealant  Sl. No. Properties Test Method Tested Values 1. Colour Resin Hardener ATM-R002   Cream Black 2. Specific gravity Resin(Part A) Hardener(Part B) ATM-R004  1.359 1.50 3. Viscosity @ 30±1°C, cPs Resin(Part A) Hardener ATM-R006  50000 66000 4. Mixing ratio (R:H) (By weight) -- 92:8 5. Pot life @ 30°C, minutes ATM-R007 464 6. Curing schedule @ RT, days  7 7. Volatile content, % 150°C, 2 hours Resin Hardener  °C, 2 hours A B ATM-R009   0.62 0.73 180 12.13 4.42 8. Tensile strength, kg/cm2 ATM-R020 3.80 9. Elongation, % ATM-R020 500 10. Hardness Shore A ATM-R069 12 11. Lap shear strength, kg/cm2 Aluminium – Aluminium Ms – MS  ATM-R022  4.0 4.6
Anabond Tuffseald 2P Pourable Polysulphide Sealant Technical Data Sheet May 2008 Two part Polysulphide sealant  Mix ratio  System      Parts by weight  Anabond POURABLE Polysulphide (Part A)  92 Anabond POURABLE Polysulphide (Part B)  8  Processing  Data (As mixed)  Pot life     : 7 hours minimum (@30±°C)  

Additional Information:

  • Delivery Time: WITHIN WEEK
  • Packaging Details: 4 KG PACK

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES