Lube Adhesive & Engineering Co.

Including GST                                                               Akfix 805 is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.
Excellent adhesion & filling capacity and high thermal & acoustical insulation value.
Excellent mounting capacity and stability.
Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials.
Mould-proof, water-proof, over paintable.
Cured foam dries rigid and can be trimmed, shaped and sanded. 
Applications Area
Fixing and insulating of door and window frames.
Filling and sealing gaps, joints and cavities.
Filling of penetrations in walls.
???Insulating electrical outlets and water pipes. 

Additional Information:

• Delivery Time: within 2 days
• Packaging Details: 300 ml ,500 ml ,750 ml pack Available

GST EXTRA .PRICE IS 750 ML PACK SIZE.
BOSS® 333 Polyurethane Expanding Foam TECHNICAL DATA SHEETTYPICAL PROPERTIESASTM D-1622 Density  59.31 lbs./ft³IN HOUSE METHOD Yield/24 Oz. Can   41.6 liters freely foamedASTM C-518 Thermal Conductivity  0.22 - 0.26 Btu-in/hr-F-ft²ASTM C-518 R Value  3.8 - 4.5 hr-F-ft²/Btu Tack Free (1” bead)  10 minutes (73°F & 50% RH) Can Be Cut (1” bead)  90 minutes (73°F & 50% RH) Fully Cured (1” bead)  24 hours (73°F & 50% RH)ASTM E-84-04 UL 723 Fire Testing  Flame Spread-15, Smoke Developed-35DIN 53429 Water Absorption  1% Service Temperature  40°F - 200°F Application Temperature  40°F - 115°F*Information on this data sheet is subject to change without notice and should not be used for writing specifications. For additional information on specific applications, contact Soudal AccumetricUSES • Air sealing • Partition walls with ceilings • Through penetrations around cables and pipes • Seams between chimneys, roof protection, roof panels and wall panelsDESCRIPTION BOSS® 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume on contact with air. The expanding action fills holes, cracks and gaps more completely than standard caulks. BOSS® 333 has excellent insulating properties and superb adhesion to virtually all building materials.FEATURES • Meets CA-25-4 • UL Classified, Tested to ASTM E-84 • Triple Expanding • Weatherproofs against wind and moisture • Fills gaps, cracks and holes • Seals out insects and pests • Can be sanded, painted and stained • Complies with EPA Method 24 and California Air Resource Board Method 310 • VOC CompliantBOSS is a registered trademark of Soudal Accumetric062217TDS333-GunHOW TO USE Surfaces must be clean and free of grease, oil and dust. For best results spray mist into cavity prior to applying foam. Screw the can firmly onto the gun. Do not overtighten. Fill cavities roughly 65% as foam will slightly expand. Do not overfill. During application hold gun so that the can is UPSIDE DOWN. For best results, use in temperatures between 60°F to 100°F.DANGER! EXTREMELY FLAMMABLE. CONTENTS UNDER PRESSURE. Turn off all pilot lights, electrical igniters, burners and other sources of ignition or heat during use. Do not smoke, use matches or lighters while dispensing foam. Do not expose to direct sunlight, high heat or store in enclosed vehicle. Avoid breathing vapor/ spray. Use in adequately ventilated areas with appropriate breathing apparatus. Avoid contact with skin and eyes. Wearing eyewear and gloves is recommended. Do not incinerate or puncture can. Store at temperatures below 120°F. EYE IRRITANT. May irritate or cause allergic reaction to skin. Inhalation of vapor may result in respiratory allergies including asthma. Persons with known isocyanate allergies should avoid any skin or respiratory contact with product ingredients. Use with adequate ventilation or suitable respiratory protective equipment. Wear protective clothing to avoid skin contact. Wear eye protection. FIRST AID: Inhalation - move immediately to fresh air. Eye contact - flush eyes immediately for 15 minutes. Skin contact - wash affected area immediately with plenty of soap and water. Get medical assistance in all cases (show label when possible). For further health and safety information consult the current Safety Data Sheet (SDS) available from BOSS® Products at 800-928-2677. KEEP OUT OF REACH OF CHILDREN.

Additional Information:

• Delivery Time: WITHIN THREE DAYS.
• Packaging Details: 750 ML

Including GST                                                      KINGSTON GENERAL PURPOSE PU FOAM 80 is a one-component, ready to use multi-purpose Polyurethane Foam. It is fitted with a plastic adapter head for use with a foam application gun or a plastic applicator. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation.
PRODUCT FEATURES Good adhesion to a wide variety of surfaces such as UPVC, masonry, brick, block work, glass, steel, aluminum, timber and other substrates (except PP, PE and Teflon); Good filling capacities; Application temperature is between + 5℃ to +35℃; Optimal application temperature is between +18℃ to +25℃; It contains CFC-free propellants which are harmless to the ozone layer.
APPLICATIONS AREAS Installing, fixing and insulating of door and window frames; Filling and sealing of gaps, joint, openings and cavities; Connecting of insulation materials and roof construction; Bonding and mounting; Insulating the electrical outlets and water pipes; Heat preservation, cold and sound insulation; Packaging purpose, wrap the precious & fragile commodity, shake-proof and anti-pressure.
APPLICATION INSTRUCTIONS Shake the aerosol can for at least 40 seconds; Clean and moisten surfaces with a water sprayer prior to application; Fit the gun or straw on the adapter; Firmly screw the can on the adapter and turn the flow adjustment screw; Fill the holes and cavities. Bottom up during application; Foam will be tack-free in about 10 minutes; Excess can be trimmed in about one hour; Fresh foam can be removed using Homey Foam cleaner or acetone. Cured foam can only be removed mechanically.TYPICAL PROPERTIESAs supplied at 25℃ and R.H.50% conditionsBase PolyurethaneConsistency Stable FoamCuring System Moisture-cureTack-Free Time (min) 7~18Drying Time Dust-free after 20-25 min.1~1.5(±25℃)Cutting Time (hour)2~3(-5℃)Yield (L)900g.gw/750ml 35~40Shrink NoneCellular Structure 60~65% open cellsSpecific Gravity (kg/m³) 17-22Temperature Resistance -40℃~+80℃Application Temperature Range 5℃~35℃Colour Off whiteFire Class (DIN 4102 ) B3Insulation Factor (Mw/m.k) 100Tensile Strength (kPa) >30 (10%)Adhesive Strengh(kPa) >800.5~2(no epidermis)Water Absorption (ML)

Additional Information:

• Production Capacity: available
• Delivery Time: within two days

Akfix MAXIMUM is a low expansion and maximum yield formulation aerosol polyurethane foam especially developed for fixing door&window frames. It yields minimum %100 more foam than straw foams, cures faster and forms easy to cut flexible foam.
Properties 

• Maximum Yield: Provides %100 more yield than that of standard straw foams.
• Low-Expansion: Ensures not to bend or bow door and window frames. Decreases foam waste.
• Fast Cure: Becomes tack free in 5 minutes and cut able within 45 minutes.
• Cures Flexible: Easier to cut if the gap is overfilled
• Reusable: Highest technology valves system provides none sticking and reusability.
• Improved Adhesion&Stability: Better non-sagging performance on vertical surfaces.
• Usable in 4 Seasons: Special formulation allows application at low temperatures (-2 °C)
• Polyurethane based: Perfect adhesion on common building materials.
• Closed-Cell Structure: Provides effective heat&sound insulation.
• It does not contain any propellant gases which are harmful to the ozone layer.
• Applications Area
  • Fixing&sealing of door and window frames.
  • Sealing applications where low-expansion is needed.
  • Filling small cavities.
  • Package

    S.Code	P.Code	Type	Volume	BoxQty	B.Pallet	Barcode
    FA002	MAXIMUM	-	Gw. 1000 g	12	-	-

Additional Information:

• Delivery Time: IMMEDIATE BASIS
• Packaging Details: 1 KG

ABOVE PRICE IS INCLUDING GST 18%.Product Specification Product DescriptionDescription

BOSS Universal Foam is a ready-to-use polyurethane foam that is designed to expand to three times its volume when in contact with air. This polyurethane foam is ready-to-use straight out of the box and is extremely versatile. Its ability to expand fills holes, cracks, and gaps more efficiently than standard caulks, and its unparalleled insulating properties and adhesion make it ideal for all building materials. It will adhere to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber, as well as painted and many plastic surfaces. BOSS 322 can be used for extended periods at temperatures up to 450 degree F (232 degree C),and for shorter periods as high as 500 degree (260 degree C).

Colours: This product is available in champagne.

Packaging: Available in a 750 ml aerosol can.

FEATURES :

 

1. Excellent Stability with a high filling capacity.
2. Freon free
3. Good adhesion on all surfaces (except PE, PP and PTFE)
4. High insulation value thermal acoustic
5. Excellent bonding properties.

Additional Information

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 750 ML

PRICE IS INCLUDING GST 18%.

Product Specification??? Curing System : Moisture Curing Appearance : Foam Tack-Free Time (at 25°C & 50% R.H.) : 10 Minutes Volume Coverage : Max. 38 L Cut Time (20 mm Diameter) : About 45 minutes Water Permeability : No Temperature Resistance Range : -40 °C – 110 °C (Intermittent) : -30 °C – 80 °C (Long term) Formaldehyde/ Dimethylbenzene :No Thermal conductivity : 0.046 W/m.K Application Temperature : 5°C to 35°C Technical Data Sheet The advice is based on our own research and experience.It is presented in good faith and may be considered reliable.However,due to the diverse processing,application and handing possibilities the information provided may not be considered legally binding. We recommend the users of our products to perform their own tests in order to determine whether our products are appropriate for the respective use and environment.We guarantee the consistent quality of our products.We reserve the right to implement technical changes and improvements. Directions 1. Surfaces must be clean and free of dirt, grease, or oil. 2. Surfaces to be made slightly damped with water spray. 3. Shake aerosol well before use. 4. Attach nozzle and spray foam on areas to be insulated. 5. Cover areas not to be insulated with paper or plastic foil. 6. Uncured foam can be removed with acetone. 7. Gaps wider than 5 cm has to be filled with multiple layers. Allow 15 - 30 minutes between layers. Limitation 1.Not recommended for locations subject to continuous water immersion. 2.Not for filling secluded areas or joints wider than 4 cm. Wider joints and joints deeper than 5 cm are to be filled multiple layers. Waiting time between applications is 15-30 minutes. 3.The foam surface has to be protected from UV light.

Additional Information:

• Delivery Time: WITHIN THREE DAYS
• Packaging Details: 750 ML PACK

Technical data: Base Polyurethane Consistency Stable foam, thixotropic Curing system Moisture cure Skin formation (20°C/ 65 % R.H.) Ca. 8 minutes Drying time (20°C/ 65 % R.H.) Dust free after 20-2 5 min. Curing Rate (20°C/ 65 % R.H.) 1,5 h for a 30mm bead Yield 1000 ml yields 30-35 L cured foam Shrink None Post expansion None Cellular Structure Ca 70-80 % closed cells, medium fine cellular structure Specific Gravity Ca 25 kg/m³ (extruded, fully cured) Temperature Resistance -40°C to +90°C when cured Colour Champagne Fire Class (DIN 4102 part 2) B3 Water Absorption (DIN 53429) 1% Vol.
Product: Fill & Fix Foam - FF with is a one-component, self expanding, ready-to-use polyurethane foam with CFC-free propellants which are completely harmless to the ozone layer. Characteristics: • Excellent adhesion on most substrates (except Teflon, PE and PP) • High thermal and acoustical insulation • Very good filling capacities • Excellent mounting capacities Application areas: • Installation of window- and doorframes • Filling of cavities • Sealing of all openings in roof constructions • Creation of a soundproof screen • Mounting and sealing of window- and doorframes • Connecting of insulation materials and roof constructions.
• Application of a soundproofing layers • Improving thermal insulation in cooling systems • Installation of air conditioners Packaging: Aerosol cans 750 ml and 300 ml Shelf life and storage: • 12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures between +5°C and +25°. • Always store can with the valve pointed upwards Application: Shake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. Remove pressure from the applicator to stop. Fill holes and cavities for 50 %, as the foam will expand.  

Additional Information:

• Delivery Time: IMMEDIATE

Additional Information:

• Delivery Time: WITHIN 3 TO 4 DAYS

ABOVE PRICE IS INCLUDING Gst 18%.
Revision: 01/0/2018 Page 1 of 2 Technical data: Basis Polyurethane Consistancy Stable foam, thixotopic Curing system Moisture curing Skin Formation (FEICA TM 1014) 8 - 10 min Cutting Time (FEICA TM 1005) 25 - 35 min Density Ca. 25 kg/m³ Sound insulation (EN ISO 717-1) 50 - 60 dB Insulation factor (DIN52612) 35 mW/m.K Curing time 95 min for a 30 mm bead Joint Yield (FEICA TM 1002) 750 ml yields ca. 21 m of foam Shrinkage (FEICA TM 1004) < 2 % Post-expansion (FEICA TM 1004) < 2 % Cellular Structure Ca. 70 % closed cells Fire rating (DIN4102) B3 Insulation factor (DIN52612) 35 mW/m.K Compressive strength (FEICA TM 1011) Ca. 2,0 N/cm² Shear strength (FEICA TM 1012) Ca. 5,0 N/cm² Water absorption 1 % volume Temperature resistance -40 °C till +90 °C (cured) Soudal NV uses test methods approved by FEICA designed to deliver transparent and reproducible test results, ensuring customers have an accurate representation of product performance.  FEICA is a multinational association representing the European adhesive and sealant industry, including one-component foam manufacturers. 
Product: G EN 750 is one-component, self-expanding, ready Characteristics: ??? Excellent adhesion on most substrates (except Teflon, PE and PP) ??? High thermal and acoustical insulation ??? Very good filling capacities 
Application examples: ??? G ap filling applications ??? Cavities filling ??? Sealing of all openings in roof constructions ??? Creation of a soundproof screen ??? Connecting of insulation materials and roof constructions ??? Application of a soundproofing layer on motors ??? Improving thermal insulation in cooling systems
Packaging: Aerosol can 750 gms Shelf life and storage: ??? 12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures between +5°C and +25°. ??? Always store can with the valve pointed upwards Application: Shake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. Remove pressure from the applicator to stop. Fill holes and cavities for 50 %, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Foamcleaner or acetone. Cured foam can only be removed mechanically. Working temperature 5°C to 40°C. (20°C-25°C recommended) Health and safety recommendation: ??? Apply the usual industrial hygiene. ??? Wear gloves and safety goggles. ??? Remove cured foam by mechanical means only, never burn away ??? Consult the label for more information. Remarks: ??? Cured PU foam must be protected from UVradiation by painting or applying a top layer of sealant (silicone, MS Polymer, PU and acrylic) Technical Data Sheet R

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 750 ML PACK

ABOVE PRICE IS INCLUDING GST 18%.

USPRO Foam is an one component polyurethane foam (OCF) used primarily to seal, fill, fix & adhere the gap between door, window & wall. They are water proof,  CFC free, environment protective & are flame retardant.OCF is the outcome of the combionation of aerosol technique & polyurethane foam technique. TYPICAL PROPERTIES Flame retardancy: B3 GRADE  Density: 15-30kg/m3  Temperature resistance of cured foam : -35de.c to +80deg.c.  Tack free time: 9-13min  Cutting time: 60min  Yield per 100 ml: 6liters  Method of application  - All surfaces should be clean from oil, greases, loose particles and dust.  Dry surfaces should be well sprayed or dampened  with water. - Shake can vigorously for one minute before use. - Screw plastic  straw on can firmly, aim straw at gap then spray. - When spray please pay attention to the speed. Fill vertical joints from the bottom up when half filled enough. - When fill gaps in ceiling, uncured foam may drop because of gravity, please support properly after filling until foam cure and adhere to the gap. - Foam is tack free after about 10 minutes, can be cutted after 60 minutes - Cured foam will turn yellow by direct exposure to UV rays, so painting or coating is recommended. 
Use a knife to smooth the cured foam and treat surface with cement, paint or silicone  Advantages   - Make use of convenience : No special training required easy to use like DIY. - Automatism spray : needless  pouring, pressure in cans can put material into gap. - Automatism expands:OCF can expand by itself and fill in every gap - Humidity cure : No need of  cure assistant, it can be cured by humidity in air - Automatism felt : No pretreatment required  for surface, it has good viscosity (especially wet surface)  Area of application  -Door and window installation : seal, fill, fix and adhere the gap between door, window and wall. -Advertisement model : making of model, sand plate, repair of show board. -Sound insulation and absorption : insulate and absorb sound as a sealant in speech room and broadcast studio. -Daily maintenance : repair the hole, gap, wall brick, earth brick -Water proof and block leakage : mend the hole of water pipe and cloaca. -Packing and transportation :pack valuable and fragile goods easily, time saving, quick, shock and press resistance. PRECAUTIONS • The container should be capped immediately after use to avoid exposure to atmosphere. SHELF LIFE Storage life: 9months when stored at 20from date of manufacturing in factory sealed container. PACKING • In plastic cartridge of 750ml.  STORAGE Store in cool & dark shaded place away from the sunlight in tightly closed condition. There is pressure of 5-6kg/sqcm(25deg.c), hence to ensure that temperature won’t exceed 50deg.c during storage & transportation to avoid explosion. 

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 750 ML