Lube Adhesive & Engineering Co.

PRODUCT : M-SEAL PHATAPHATFast Setting Epoxy PuttyDESCRIPTION: M-SEAL PHATAPHAT is a faster setting two component, multi-purpose epoxyputty. M-SEAL PHATAPHAT is useful in sealing, gripping, joining & insulating variety ofsurfaces like ferrous and non-ferrous metals, porcelain, ceramic, marble, granite, asbestos,glass, wood, and certain plastics. M-SEAL PHATAPHAT on curing exhibits tough & long lastingbond. It sets in 25-30 minutes into a hard mass that can be drilled, filed, tapped, machined, cutand then painted. M-SEAL PHATAPHAT has very good electrical insulating properties and thecured product is resistant to moisture, heat, mild acids & alkali.APPLICATION AREA:INDUSTRIAL: Sealing blowholes, cracks, and leakage’s in ferrous and non-ferrous castings,pumps and mould boxes etc. It gives smooth finish to joints & corners and sealing holes/cracksin wooden and metal patterns. Sealing of leakage/cracks in metal fabrications, industrial vessels,boilers, hulls of ships, boats and trawlers. Sealing water supply mains, storage tanks, concretesewer pipes, heat exchanger coils etc. Repairing of damaged internal threads of various types ofmachine pumps. Sealing cracks in casings of meters/gear-box etc.ELECTRICAL: Sealing and insulating cable terminators, cable entries into switch boxes,machines etc. Covering and insulating underground and overhead twist-joints of aluminiumconductors. Sealing flanges and cable entry portions of conventional cable-joints/moulds tomake them moisture-proof. Sealing leakage in transformers, oil circuit breakers and other oilfilled electrical switchgear equipment.AUTOMOBILE: Sealing leakage in radiator, diesel & petrol tank, water/fuel pumps, engineblocks, gear boxes, differential, carburetor, battery casing, muffler, silencer, fuel injection pumps.GENERAL: Repairing and sealing surfaces underwater like plugging a hole, repairing andsealing leakage in overhead/ flush tanks, taps, pipelines etc. Filling gaps in aluminium slidewindows, channels and concrete.GENERAL INSTRUCTIONS FOR USE:· Substrate Preparation: To get optimum results, proper substrate preparation is essential.Remove rust, dust, grease etc from the surface. Abrade the surface with sand-paperfollowed by degreasing with TRICHLOROETHYLENE or ACETONE.· M-SEAL PHATAPHAT consists of two parts (RESIN & HARDENER) which are supplied inthe form of sticks of equal volume, individually wrapped and sealed to be mixed in the ratioof 1:1 by volume or weight. Keep the Resin & Hardener sticks side by side as illustrated onthe pack. Cut equal lengths with a knife.· M-SEAL PHATAPHAT RESIN (Green) & HARDENER (Black) are in different contrastcolours to help users to know the uniform mixing. Mix thoroughly with both hands by rolling &kneading until uniform colour is attained. It takes about 2 minutes to get a uniform mix for50g of putty.PDF created with pdfFactory Pro trial version www.pdffactory.com· As soon as M-SEAL PHATAPHAT Resin/Hardener is mixed, the chemical reaction startsimmediately and it is advisable to start application on clean substrate as soon as mixing isover. Spreading of adhesive is easy in the first 5 minutes. M-SEAL PHATAPHAT will totallyharden in approximately one hour to an extent wherein one can start next operation viz.drilling , tapping , filing etc.· At low temperatures the curing process is slow and similarly at elevated temperatures theprocessing time is reduced.· A cured M-SEAL PHATAPHAT on cure can be painted.· DO’S & DON”TS: Keep the unused M-SEAL PHATAPHAT resin & hardener portion wellpacked for further use. We do not recommend addition solvent/water to facilitate the ease ofapplication of mix. Similarly excess hardener is not to be added to make the setting fast.

Additional Information:

• Delivery Time: within 2 days

GST 18% EXTRA.
TECHNICAL DATA SHEETSaral Seal (GENERAL PURPOSE) EPOXY PUTTY COMPOUNDDESCRIPTION: Saral-Seal(General Purpose) Epoxy Putty Compound is a two component roomtemperature curing , easy to use multi-purpose epoxy putty compound, useful in sealing, gripping,joining, insulating variety of surfaces like ferrous and non-ferrous metals, porcelain, ceramic, marble,concrete, granite, ivory, asbestos, glass, wood, certain plastics, etc. On curing, the compound exhibitstough and long lasting 3-dimensional bond and sets into a hard mass that can be drilled, tapped,machined, cut and then painted. It has a good electrical insulating properties and the cured product isresistant to moisture, heat, mild acids and alkali.
APPLICATION AREAS: Ideal for industrial, electrical, automotive, grouting civil cracks, general &Household, handicraft applications. Resin and hardener components are equally mixed with both handsby rolling between two palms until a dark gray colour (like dried cement mortar) is attained.As soon as Resin/Hardener are mixed, the chemical reaction starts immediately, and it’s advisable toapply it on clean substrate immediately after the mixing is over. The job should be completed wellwithin the usable life (spreading of matrix is easy in the first 5-10 minutes) of mix to get optimumResults.The compound will set in 1 hours to an extent, depending on the ambient room temperature. Atlow temperatures the curing process is prolonged and similarly at elevated temperatures the processingis reduced.Don’t mix the product for long time in the hand and apply on the substrate immediately thereafter.
TYPICAL COMPOSITE PROPERTIES (ON FULL CURE):SERIALNo. TEST PROPERTY UNIT VALUE1 Mixing Ratio Ratio 1:012 Usable life at 27°C Minutes 10 approx3 Setting Time at 27°C Minutes 50-60 approx4 Hardening Time at 27°C Minutes 75 approx5 Tensile Strength Kg/cm² >2006 Compressive Strength Kg/cm² >4007 Impact Strength Kg/cm² >3.08 Hardness Scale >759 Overlap Shear Strength Kg/cm² >9010 water Absorption % <0.311 Density of cured mass (1:1) g/cc 2.4 - 2.5NOTE: These typical-properties are not be construed as product specifications.
SAFETY PRECAUTIONS: Generally the SARAL-SEAL putty when mixed in right proportion, on completecure, is non-toxic and harmless. The resin component is non-toxic; hardener being based on amine typemay cause irritation only to sensitized skin. Do not use organic solvents for cleaning hands.STORAGE & SHELF-LIFE: Store in a cool (27°C) and dry place. Under such conditions the shelf life of thisproduct is about 12 months in sealed unopened packs.NOTE: We recommend that before using our product in full-scale production, the user should make hisown tests to determine the suitability under his operating conditions. As the circumstances under whichour product is stored, handled and used are beyond our control, we cannot assume any responsibilityfor any misuse by the user.

Additional Information:

• Production Capacity: AVAILABLE
• Delivery Time: WITHIN TWO DAYS
• Packaging Details: 1 KG PACK

BONDSET (FAST SETTING): HIGH STRENGTH EPOXY PUTTY
Bondset is a multipurpose epoxy based compound; Resin & Hardener are supplied as two sticks of
different colors, wrapped & sealed separately. Bondset putty has been developed to meet various
requirements in electrical, mechanical, civil and allied engineering fields and in domestic applications.
TYPICAL APPLICATIONS:
Bondset is a versatile product which has many uses in domestic and industrial segments.
APPLICATION IN AUTOMOBILE:
For filling of dents in automobile bodies, broken silencer pipes and muffler joints, to prevent leakage in
engine radiator, fuel tanks, gear boxes, fuel injection pumps.
APPLICATION IN CIVIL FIELD:
Sealing of CI pipe joints, sewage pipe lines, filling and repairing of ceramic tile joints, sealing water
supply mains, concrete pipes etc, repair of floor damaged by movement of heavy machinery, rounding
of corners of floor in pharma formulation plant to make cleaning of corners conveniently.
APPLICATION IN HOUSEHOLD ITEM:
It is very useful for sealing, repairing, jointing insulating, water proofing for various materials like small
ferrous, non ferrous metals woods, glass, asbestos, ivory sheet, ceramic, most plastics etc. repairing
leaking tanks of RCC, and mild steel, over head flush tanks, water coolers, air conditioner, refrigerator
etc., repairing broken parts of house hold items i.e pressure cooker handle, fry pan handle,
broken/damaged wash basin, water cooler tanks etc. for fixing window glass on frames, for fixing screw
nails on walls.
APPLICATION IN ELECTRICAL FIELD:
Sealing leakage in transformer repairing, chipped porcelain insulators and bushing. To seal the contact
between lug of jumper and transformer bushing stem to prevent oxidation. To seal enclosure of the
choke and fuse unit of mercury lamps. To seal motor terminals to prevent loosening of connection due to
vibration & subsequent heating. Balancing of motors and armatures, for moisture proofing in cable
joints made with CI & plastics.
APPLICATION IN FOUNDARIES:
For sealing and plugging blow holes in moulds, patterns & castings.
METHOD OF APPLICATION:
Cut equal amount of resin and hardener from the sticks, mix thoroughly from fingers and hands. When
the mixture attains uniform colors it is ready for use. After full curing machining, drilling, cutting, filling
and tapping is possible.
SURFACE PREPERATION:
The surface should be free from dust, rust, oil, paints, varnish, moisture etc. every paper or grinder can
be used to abrade the surface for better binding. Acetone, petrol can be used to free the surface from oil,
grease.

TECHNICAL SPECIFICATIONS:Particulars Specification Unit Fast setting
Mixing ratio
(Resin/Hardener)
By vol / wt 1:1
Pot life
processing time
(at 25ºc)
Min 100-125
Properties of
cured compound
Tensile strength DIN Kg/cm² 100-125
Flexural strength DIN Kg/cm² 225-250
Impact strength
(notched)
DIN Kg.cm/cm² 3-3.5
Compressive
Strength
DIN Kg/cm² 500-550
Dielectric strength DIN Kv/mm 12-14
Hardness DIN Shore d 80-85
Water absorption DIN % wt 0.4-1
Density DIN g/cc 2-2.85
Temperature
resistance
DIN ºc 115
Packings 15gm,30gm, 75gm,
100gm, 250gm, 1 kg,
4 kg

Additional Information:

• Delivery Time: WITHIN 2 DAYS

BONDSET: HIGH STRENGTH EPOXY PUTTY
Bondset is a multipurpose epoxy based compound; Resin & Hardener are supplied as two sticks of
different colors, wrapped & sealed separately. Bondset putty has been developed to meet various
requirements in electrical, mechanical, civil and allied engineering fields and in domestic applications.
TYPICAL APPLICATIONS:
Bondset is a versatile product which has many uses in domestic and industrial segments.
APPLICATION IN AUTOMOBILE:
For filling of dents in automobile bodies, broken silencer pipes and muffler joints, to prevent leakage in
engine radiator, fuel tanks, gear boxes, fuel injection pumps.
APPLICATION IN CIVIL FIELD:
Sealing of CI pipe joints, sewage pipe lines, filling and repairing of ceramic tile joints, sealing water
supply mains, concrete pipes etc., repairing of floor damaged by movement of heavy machinery.
APPLICATION IN HOUSEHOLD ITEM:
It is very useful for sealing, repairing, jointing insulating, water proofing for various materials like small
ferrous, non ferrous metals woods, glass, asbestos, ivory sheet, ceramic, most plastics etc. repairing
leaking tanks of RCC, and mild steel, over head flush tanks, water coolers, air conditioner, refrigerator
etc., repairing broken parts of house hold items ie. pressure cooker handle, fry pan handle,
broken/damaged wash basin, water cooler tanks etc. for fixing window glass on frames, for fixing screw
nails on walls.
APPLICATION IN ELECTRICAL FIELD:
Sealing leakage in transformer, repairing chipped porcelain insulators and bushing. To seal the contact
between lug of jumper and transformer bushing stem to prevent oxidation. To seal enclosures of the
choke and fuse unit of mercury lamps. To seal motor terminals to prevent loosening of connection due to
vibration & subsequent heating. Balancing of motors and armatures, for moisture proofing in cable
joints made with CI & plastics.
APPLICATION IN FOUNDARIES:
For sealing and plugging blow holes in moulds, patterns & castings.
METHOD OF APPLICATION:
Cut equal amount of resin and hardener from the sticks, mix thoroughly from fingers and hands. When
the mixture attains uniform colors it is ready for use. After full curing machining, drilling, cutting, filling
and tapping is possible.
SURFACE PREPERATION:
The surface should be free from dust, rust, oil, paints, varnish, moisture etc, every paper or grinder can
be used to abrade the surface for better binding. Acetone, petrol, kerosene oil can be used to free the
surface from oil, grease.
TECHNICAL SPECIFICATIONS:
Particulars Specification Unit Normal Fast setting E. mix
Mixing ratio
(Resin/Hardener)
By vol / wt 1:1 1:1 Premeasured
stick
Pot life
processing time
(at 25ºc)
Min 125-150 100-125 100-125
Properties of
cured compound
Tensile strength DIN Kg/cm² 125-150 100-125 100-125
Flexural strength DIN Kg/cm² 300-325 225-250 250-300
Impact strength
(notched)
DIN Kg.cm/cm² 3-4 3-3.5 2.5-3
Compressive
Strength
DIN Kg/cm² 550-600 500-550 500-550
Dielectric strength DIN Kv/mm 12-14 12-14 12-14
Hardness DIN Shore d 80-85 80-85 80-85
Water absorption DIN % wt 0.3-0.8 0.4-1 0.4-1
Density DIN g/cc 2.1-2.8 2-2.85 2-2.80
Temperature
resistance
DIN ºc 120 115 115
Packing 15gm,30gm, 75gm,
100gm, 250gm, 1 kg,
4 kg
20gm, 50gm,
100gm

Additional Information:

• Delivery Time: WITHIN 2 DAYS

GST 18 % EXTRA
Structural Bonding - 2-component epoxy. Steel-filled kneadable stick for emergency repair.LOCTITE® 3463 is a versatile, dual component, easy to use, steel-filled epoxy repair putty. It is applied like a putty and when cured it exhibits high compressive strength and good adhesion to most surfaces. This product stops leaks in pipes and tanks, fills oversized bolt holes, smoothes welds, and repairs non-structural defects in castings or holes in tanks. This product is typically used in applications with an operating temperature range of -30 °C to +121 °C.

• Steel-filled kneadable stick
• For the emergency repair of tanks, pipes and castings
• Technical Information

  Color	Grey
  Fixture Time	10 min.
  Fixture Time Temperature	15 °C
  Work Life Time	3 min.

Additional Information:

• Delivery Time: within 2 days
• Packaging Details: 114 gm stick

TECHNICAL DATASHEETPRODUCT: M-SEAL GENERAL PURPOSE EPOXY COMPOUNDDESCRIPTION: M-SEAL GP epoxy compound is a two component room temperature setting, easy to use multi-purpose putty. M-SEAL GP epoxy compound is useful in sealing, gripping, joining & insulating variety of surfaces like ferrous and non-ferrous metals, porcelain, ceramic, marble, granite, ivory, asbestos, glass, wood, leather, certain plastics etc. M-SEAL GP epoxy compound on curing exhibits tough & long lasting bond and sets into a hard mass that can be drilled, filed, tapped, machined, cut and then painted. It has very good electrical insulating properties and the cured product is resistant to moisture, heat, mild acids & alkali.APPLICATION AREA:INDUSTRIAL: Ideal for sealing blowholes, cracks, and leakage in ferrous and non-ferrous casting, pumps and mould boxes etc. It gives smooth finish to joints & corners and sealing holes/cracks in wooden and metal patterns. Sealing of leakage/cracks in metal fabrications, industrial vessels, boilers, hulls of ships, boats and trawlers. Sealing water supply mains, storage tanks, concrete sewer pipes, heat exchanger coils etc. Repairing of damaged internal threads of various types of machine pumps. Sealing cracks in casings of meters/gear-box etc.ELECTRICAL: Sealing and insulating cable terminators, cable entries into switch boxes, machines etc. Covering and insulating underground and overhead twist-joints of aluminium conductors. Sealing flanges and cable entry portions of conventional cable-joints/moulds to make them moisture-proof. Sealing leakage in transformers, oil circuit breakers and other oil filled electrical switchgear equipment. Joining metal parts to porcelain parts of suspension insulators and bonding broken porcelain insulators.AUTOMOBILE: Filling automobile body dents and cracks on the body. Sealing leakage in radiator, diesel/petrol tank, water/fuel pumps, engine blocks, gear boxes, differential, carburetor, battery casing, muffler, silencer, fuel injection pumps etc.GENERAL/HOUSEHOLD: In Handicraft to make various moulds and sculptures, In houses to close ant/cockroach holes, Repairing and sealing leakage in overhead/flush tanks, taps, pipelines etc. Filling gaps in aluminium sliding window, channels and concrete. To strengthen the hold of screws in the wall, to build wooden articles eaten by white-ants or metallic structure affected by corrosion and many other unlimited applications.TYPICAL COMPOSITE PROPERTIES:S.No.TEST PROPERTYUNITVALUE1PROCESSING TIME (USABLE-LIFE) at 300C for 50 g mixMinutes15 approx.2SETTING TIME (Hardening Time) at 30°C for 30g mix by Shore-AMinutes60 approx.3TENSILE STRENGTH as per ASTM D-638Kg/cm2> 2004COMPRESSIVE STRENGTH as per ASTM D-695Kg/cm2> 4005FLEXURAL STRENGTH as per ASTM D-790Kg/cm2> 3506IMPACT STRENGTH (Un-notched) as per ASTM D- 256Kg.cm/cm2> 3.07HARDNESS (By Shore-D Durometer) as per ASTM D-2240Scale Value> 758OVERLAP SHEAR STRENGTH (M.S) as per ASTM D-1002Kg/cm2> 909DI-ELECTRIC STRENGTH at R.T. as per ASTM D-1497KV/mm> 1010WATER ABSORPTION as per ASTM D-570%< 0.511WORKING TEMPERATURE LIMIT°C80°CGENERAL INSTRUCTIONS FOR USE:• Substrate Preparation: To get improved results, proper substrate preparation is essential to remove rust, dust, grease etc from the surface. Abrade the surface with emery paper and degrease it with TRICHLOROETHYLENE or ACETONE solvent.• M-SEAL GP epoxy compound consists of two parts (RESIN & HARDENER) which are supplied in the form of sticks of equal volume, individually wrapped and sealed to be mixed in the ratio of 1:1 by volume or weight.• The RESIN (Green) & HARDENER (Black) are in contrast colours to help to know the uniform mixing. Take equal quantity of Resin and Hardener and mix thoroughly with both hands by rolling between two palms until a uniform dark grey colour is attained. It takes about 1-2 minutes to get a uniform mix for 50g of putty.

Additional Information:

• Delivery Time: within 2 days