Lube Adhesive & Engineering Co.

ABOVE PRICE INCLUDING GST 18% ,PACKING -370 ML
631Moisture-displacing, long-term rust preventativeDESCRIPTION 631 is a moisture-displacing rust preventative and penetrate with two-year indoorcorrosion protection. It protects against corrosion with a thin oily-film and can be easilyremoved with aqueous cleaner.APPLICATIONS For corrosion and rust preventionApply by brushing or dippingMATERIALSCOMPATIBILITYRecommended for ferrous and nonferrous metalsPHYSICAL PROPERTIES Color..................................................................... BrownSpecific Gravity .................................................... 0.82Density ................................................................. 6.8 lbs/gal (820 kg/m3)Flash Point ........................................................... 180°F (82°C)Boiling Point ......................................................... 250°F (121°C)Chlorine ................................................................ NoneVOCs.................................................................... 72%Mineral Oil ............................................................ 86%DILUTION RATIOS DO NOT DILUTEAVAILABLE SIZES 1 gallon (4/case) .................................................. 710115 gallon................................................................. 7105155 gallons ............................................................. 71551HEALTH AND SAFETY Use proper safety equipment. Avoid contact with skin, eyes, and clothes. Avoid inhalingvapor or mist. Keep away from extreme heat. Keep container closed when not in use. Forcomplete Health and Safety Information refer to product Material Safety Data Sheet(MSDS) which can be downloaded

ABOVE PRICE INCLUDING GST 18%.
Appearance: Aerosol—Aerosolized Liquid Bulk—Liquid Color: Light (or pale) amber Odor: Characteristic Freeze Point/Pour Point: -63˚ C ( -81.4˚ F)( ASTM D-97) Kinematic Viscosity @ 100˚ F: 2.79 - 2.96cSt Specific Gravity @ 60˚ F: 0.8-0.82
Boiling Point : 183˚- 187 ˚ C (361˚ F - 369 ˚ F) Vapor Density: >1 Flash Point: 49˚ C (122˚ F)(Tag Open Cup) Volatile by volume: 70% - 75% Lower flammability limit: 0.6% Upper flammability limit: 8.0% Vapor Pressure: Aerosol: 95-115 psi @ 21˚ C (70˚F) Bulk: 1 psi @ 38˚C (100˚F)(ASTM D323)
Smart Straw® 8 oz NSN 8030-01-418-9006 11 oz NSN 8030-01-418-9008 12 oz
WD-40 lubricates moving parts such as hinges, wheels, rollers, chains, and gears. It protects against rust and corrosion on items like tools, and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves and locks. It quickly removes adhesives, corrosion and paint. It displaces moisture to restore water flooded equipment such as engines, spark plugs and power tools.
Operating Temperature: -10˚ F to 200˚ F Dielectric Strength: 44,400 - 47,800 Volts Solubility in Water: Insoluble
Kb Value: 24.8 Film Thickness: 17 um (US) Coverage: 600-1000 ft2 per gal
Surface Compatibility For all variations : WD-40 demonstrates none to negligible deleterious effect to plastic, rubber, and metal hard surfaces. This includes Acetal, neoprene/hard rubber, HDPE, PPS Copolymer Polysulfone, Teflon, Viton, steel, galvanized steel hot dip, electroplated, copper, brass, magnesium, nickel, tin plate, titanium, and zinc. Surface Cautions Nearly all surfaces interact with WD-40 as they would any high grade aliphatic petroleum spirit. Certain types of rubber will swell upon prolonged immersion. Wax polishes and certain wax coatings may be softened by WD- 40. Clear polycarbonate and polystyrene may stress craze or crack. Always test surfaces first. 

RUSTOLENE
A Rust Dis – Integrator
Product Description
Rustolene is a powerful rust dis-integrating solution. It is a quality product that has been a trusted for Rust removing
for years. This is a multipurpose maintenance aid and significantly reduces the maintenance cost. It is specially
formulated to fight rust, which makes it indispensable to industrial plant, factories and garages.
Overall Rustolene acts as a rust dis-integrator, dismantler, Lubricator, decarboniser & cleaner The active ingredients
in Rustolene attack the point where rust and metal parts are bound together and consequently eliminate rust from
the surface. It also penetrates the tightest of joints reaches between the finest of threads and enters the innermost
points of inaccessible mechanisms
Characteristics
· Non messy
· Non Injurious
· Saves time & labour
· Excellent film spreading property
· Excellent penetrating properties
· Non corrosive
· Cleans more effectively
· Decarbonises- Loosens carbon deposits
· Helps in easy Dismantling, Overhauling &
Repairing of machinery.
· Disintegrates and loosens out rust from metallic surface
Technical parameter
Description Of Specification Units Values
Appearance Clear Liquid
Specific gravity@ 30 0C 0.83 +0.02
Colour Reddish
Flash Point °C 45 (Minimum)
Coverage Per Litre m2 Approx 90
# 150 ml Aerosol pack is available with Co2 propellant
Application Areas
· Pipelines, Valves, Pump sets, Motors, Power
Generators
· Boilers, Compressors, Blowers, Heat Exchangers
· Office equipment
· Farm Machinery- Threshing machines, Combine
Harvester, Tractors
· Crushing and Grinding Equipment
· General Maintenance of all metallic parts & machinery
How to use:
The product can be used on all metallic substrates and can be applied either by brushing, pouring from bulk pack or
spraying from aerosol pack. Spraying should be done from 12 inches approx distance, using extension pipe.
For Rust Disintegration:
1. Remove loose rust scales from the surface
2. Brush/Pour/swab/spray Rustolene over rusted surfaces
3. Leave it on for sufficient time to allow the Rustolene to
penetrate, saturate & disintegrate.
4. Finally wipe off or brush clean rust from the surface
For Lubrication:
1. Pour / Brush / Spray Rustolene over
squeaky and jammed areas.
2. For best results, wait a while for Rustolene
to penetrate and act.
Packaging: Available in 150ml Aersol, 500 ml, 1 / 5 Litre plastic containers & bulk packaging also on customer
request.
Shelf Life: 1 year from date of manufacturing under normal storage conditions. Store in cool, dry place preferably
away from direct sun light.
Special care:
1. Replace the cap immediately after use. Avoid using fingers for application.
2. Store in a cool and dry place.
Caution: Inflammable. Keep away from naked flame

ABOVE PRICE IS INCLUDING GST 18%. 
Multi-purpose Maintenance SprayDescription Lacare® AM 70 is a maintenance spray quite useful for various engineering and householdapplication. It pores through capillary action and loosens jammed and rusted metal parts, bolts,nuts, shafts and bearings. Low viscosity of product allows rapid penetration into minor gaps oftenaciously held moving parts and helps to reduce friction and enables easy movements of metalparts. It loosens and cleans surfaces from dirt, rust, grease and oil. Product also dissolves mostadhesives enabling easy removal of labels and stickers.Applications AM 70 is a versatile product which lubricates moving parts and protects against rust and corrosion.Automobile, general engineering, aviation, construction, farming, sports and leisure, hardware andhome improvement are major segments for extensive application of this product.Advantages Excellent lubrication on moving partsProtects against rust and corrosionPenetrates and loosens tight, seized, rusty nuts & boltsDisplaces moisture from equipmentFree from Chlorofluorocarbons (CFC)Compliant to RoHS regulationTypical specifications Test Unit Reference ValueAppearance Visual Visual Clear or slightly cloudyColor Visual Visual Brownish yellowOdor - - Slight, pleasant odorSpecific gravity at 25°C - ASTM D 4052 0.77 - 0.81Viscosity on Ford Cup B4 at 25°C Second - 12 - 14Flash Point (Open cup method) °C - 52Solubility in Water - - InsolubleWear Preventive (Four Ball Test) mm ASTM D 4172 Max 0.82Extreme Pressure Kg ASTM D 2783 Passes 100kgCorrosion (Salt Spray Test) for 72Hours Hours ASTM B 117 No rust formationOperating Temperature °C - -50 to +150
Processing Surface compatibility: AM 70 is safe on standard rubber, plastic and metals. Certain types ofrubber may swell upon prolonged immersion. Wax polishes and certain wax coatings may becomesoft by AM 70. Polycarbonate and polystyrene may stress or crack on prolonged contact withproduct. This is recommended to test surfaces first before application of AM 70.Application:1.Shake intermittently to get uniform consistency and avoid prolonged continuous spray2. Product can be easily applied by pushing spray nozzle. Avoid spray while keeping the can upsidedown3. Apply liberally on jammed parts. Repeat the spray application until full penetration is achieved4.Best results can be achieved if used between 0 to 50°CLACARE® AM 70Technical Data Sheet | Polymers BusinessJanuary 2018 Page 2 of 2Precautions Highly flammable, keep containers away from heat, flame, spark and naked flameKeep container tightly closed when not in useKeep out of reach of childrenUse only in well ventilated areaPackaging Available in 45gm and 85gm aerosol spray can.Storage and handling Lacare AM 70 should be stored in a cool and dry place, preferably in a sealed container and shouldnot be exposed to direct sunlight. It contains highly volatile and flammable solvents. Direct orindirect exposure to heat and spark must be avoided. This product has a shelf life of 2 years ifstored in its original container between 2°C and 40°C away from humidity and excessive heat.Safety Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of directcontact and irritation, it should be washed off immediately with soap and warm water. Avoidbreathing vapours, mist or gas. Please refer to the Safety Data Sheet (SDS) of Lacare AM 70 fordetailed safety instructions.Spills and disposal In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closedcontainers for disposal. Soak up with an absorbent such as clay, sand or other suitable material.Flush area with water to remove trace residue. Do not allow the product to reach the sewagesystem. Waste must be disposed of in accordance with federal, state or local regulations, asapplicable.

ABOVE PRICE IS INCLUDING GST 18%
LACARE® AM 70Technical Data Sheet | Polymers Business January 2018 Page 1 of 2Multi-purpose Maintenance Spray Description Lacare® AM 70 is a maintenance spray quite useful for various engineering and household application. It pores through capillary action and loosens jammed and rusted metal parts, bolts,nuts, shafts and bearings. Low viscosity of product allows rapid penetration into minor gaps oftenaciously held moving parts and helps to reduce friction and enables easy movements of metalparts. It loosens and cleans surfaces from dirt, rust, grease and oil. Product also dissolves mostadhesives enabling easy removal of labels and stickers.Applications AM 70 is a versatile product which lubricates moving parts and protects against rust and corrosion.Automobile, general engineering, aviation, construction, farming, sports and leisure, hardware andhome improvement are major segments for extensive application of this product.Advantages Excellent lubrication on moving partsProtects against rust and corrosionPenetrates and loosens tight, seized, rusty nuts & boltsDisplaces moisture from equipmentFree from Chlorofluorocarbons (CFC)Compliant to RoHS regulationTypical specifications Test Unit Reference ValueAppearance Visual Visual Clear or slightly cloudyColor Visual Visual Brownish yellowOdor - - Slight, pleasant odorSpecific gravity at 25°C - ASTM D 4052 0.77 - 0.81Viscosity on Ford Cup B4 at 25°C Second - 12 - 14Flash Point (Open cup method) °C - 52Solubility in Water - - InsolubleWear Preventive (Four Ball Test) mm ASTM D 4172 Max 0.82Extreme Pressure Kg ASTM D 2783 Passes 100kgCorrosion (Salt Spray Test) for 72Hours Hours ASTM B 117 No rust formationOperating Temperature °C - -50 to +150Processing Surface compatibility: AM 70 is safe on standard rubber, plastic and metals. Certain types ofrubber may swell upon prolonged immersion. Wax polishes and certain wax coatings may becomesoft by AM 70. Polycarbonate and polystyrene may stress or crack on prolonged contact withproduct. This is recommended to test surfaces first before application of AM 70.Application:1.Shake intermittently to get uniform consistency and avoid prolonged continuous spray2. Product can be easily applied by pushing spray nozzle. Avoid spray while keeping the can upsidedown3. Apply liberally on jammed parts. Repeat the spray application until full penetration is achieved4.Best results can be achieved if used between 0 to 50°C

MAAX RUST OFF SPRAY
Multi-Functional Rust Loosener Spray
PROPERTIES
Replaces moistures
Excellent lubricant
Heavy duty rust remover
Easily removable thin film
Superior penetrating property
General purpose cleaner
Long term corrosion inhibitor
Optimum area coverage
Non-Staining, Non-Toxic and Eco-Friendly
APPLICATIONS
Industrial, Automotive, Cement, Chemical, Food Processing, Home Appliances, Textile, Telecom, Pneumatic, wind mills, Railways, and wide range of general purpose maintenance applications.
SPECIFICATIONS
Property RUST OFF SPRAY Colour Clear Amber color Density at 25°C (g/cc) 0.76 ± 0.02 Film Type Thin Oily Film Thickness 4-5 Microns Pack Size 500 ml Shelf life 18 months

ABOVE PRICE IS INCLUDING GST 18% MOQ 24 NO

Appearance: Aerosol—Aerosolized Liquid Bulk—Liquid Color: Light (or pale) amber Odor: Characteristic Freeze Point/Pour Point: -63?? C ( -81.4?? F)( ASTM D-97) Kinematic Viscosity @ 100?? F: 2.79 - 2.96cSt Specific Gravity @ 60?? F: 0.8-0.82

Boiling Point : 183??- 187 ?? C (361?? F - 369 ?? F) Vapor Density: >1 Flash Point: 49?? C (122?? F)(Tag Open Cup) Volatile by volume: 70% - 75% Lower flammability limit: 0.6% Upper flammability limit: 8.0% Vapor Pressure: Aerosol: 95-115 psi @ 21?? C (70??F) Bulk: 1 psi @ 38??C (100??F)(ASTM D323)
WD-40 lubricates moving parts such as hinges, wheels, rollers, chains, and gears. It protects against rust and corrosion on items like tools, and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves and locks. It quickly removes adhesives, corrosion and paint. It displaces moisture to restore water flooded equipment such as engines, spark plugs and power tools

ABOVE PRICE IS INCLUDING GST 18% 170GM.
Cleans: Zorrik 88 loosens and cleans surfaces from dirt, rust, grime, caked grease and oil. It dissolves most adhesives enabling easy removal of labels / stickers.  Lubricants: Zorrik 88 is an effective lubricant. It penetrates easily and rapidly in to the minor gaps of tenaciously held moving parts. It helps to reduce friction and enables easy movements of metal parts.  Penetrates: Zorrik 88 protects rust to metal bonds, crevices and pores through capillary actions and loosens / frees jammed, frozen and rusted metal parts, bolts, nuts, shafts and bearings.  Displaces moisture: Zorrik 88 penetrates and goes under surface moisture and forms a protective film between moisture - induced short circuits in electrical contacts.  Specifications:Brand Name: PidiliteType: Zorrik 88Weight: 170GMManufacturer:  Pidilite Feature:

• Pidilite zorrik 88 has social Formulation 
• Pidilite zorrik 88 has aerosol spray packing
• Cleans, protects, Lubricates, Dispalces Moisture
• Standards and offer high durability
• Pidilite zorrik 88 comes in a pack of 170GM

MAAX CHAIN MAGICHi Grade Synthetic Chain Lube SprayPROPERTIES Excellent penetration provides complete lubrication Does not drip off & Low starting resistance  Good adhesion, silencing and water resistance Protects against rust and corrosion Excellent cold, hot and salt water resistance Reduces friction, Long life and efficiency Operating temperature up to 250°CAPPLICATIONS  Designed for lubrication of Chains, doors,cranes, cutting tools, forklifts, pulleys, sliding surfaces emergency brake, pedal, threaded parts, etc.,METHOD OF APPLICATIONS? ?? The surface to be lubricated should be free from dust, dirt, oil, grease, moisture and other contamination and preferably clean with MAAX- ALL CLEAN PLUS for optimum performance.SPECIFICATIONSProperty MAAX -CHAIN MAGIC Colour Clear -Light yellow Density@ 25°C 0.84 ± 0.02 Film Type Wet Operating temp in °C min + 250°C Packing 250 ml & 500 ml spray HS CODE 34039900