Lube Adhesive & Engineering Co.

ABOVE PRICE IS INCLUDING GST 18%

Product Description :

• Pioneer Acrylic Spray Paint Is A Marine Grade Touch Up Spray Paint Which Is A Fast Drying Paint Based On Thermoplastic Acrylic And Offers Excellent Adhesion, Flexibility And Uv Resistance. It Creates A Marine Coating Which Is A Type Of Protective Coating Which Protect Ships, Vessels, Tankers, And Other Materials From Rigours Of Marine Environment. In Addition It Offers Good Resistance To Almost All Domestic Chemicals Like Detergent, Water, Abrasion, Heat Etc.

Area Of Application:

• Weather Resistant 
• Non Sag 
• Ozone Friendly 
• Lead Free 
• High gloss
• Highly durable 
• Fast drying 
• High UV resistance

Additional Information:

• Delivery Time: 24
• Packaging Details: BOX

ABOVE PRICE IS INCLUDING GST 18%
POLYURETHANE FOAM 1 – DESCRIPTION POLYURETHANE FOAM is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer. 2 – PROPERTIES • Excellent adhesion & filling capacity and high thermal & acoustical insulation value. • Excellent mounting capacity and stability. • Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. • Mould-proof, water-proof, over paintable. • Cured foam dries rigid and can be trimmed, shaped and sanded. • The French VOC requirements for class A+ • The requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.3 - APPLICATIONS • Fixing and insulating of door and window frames. • Filling and sealing gaps, joints and cavities. • Filling of penetrations in walls. • Insulating electrical outlets and water pipes. 4 - INSTRUCTIONS Optimal can temperature is +20 °C. Application (ambient) temperature is between -2 °C to +30 °C. Shake the can well before use. Screw the adapter on the valve. Hold the can upside down and activate the foam by pressing the valve. Moisturizing the surfaces and the foam improves adhesion and shortens curing time. Fresh foam can be cleaned by Eurofix Foam Cleaner. Cured foam can be cleaned barely mechanically. 5- PACKAGING Product Volume Package POLYURETHANE FOAM 750 ml 12 POLYURETHANE FOAM 500 ml 12 POLYURETHANE FOAM 300 ml 12- STORAGE AND SHELF LIFE 15 months if stored properly. 7- RESTRICTIONS • Storage above +25 °C and below +5 °C shortens shelf life. • Should be stored and transported in vertical position. • Should be kept in room temperature for at least 12 hours before the application. • Cured foam will discolor if exposed to ultraviolet light. • Paint or coat the cured foam for best results in outdoor applications. • Lower temperatures decreases yield and curing time. 8- SAFETY Contains Diphenylmethane-4,4'-Diisocyanate. Harmful by inhalation. Irritating to eyes, respiratory system and skin. Do not breathe spray/vapour. Wear suitable protective clothing and gloves. Use only in wellventilated areas. Pressurized container. Keep away from direct sunlight and do not expose temperatures over 50 °C. Do not pierce or burn, even after use. Keep away from sources of ignition, no smoking. Keep out of the reach of children. 9- TECHNICAL PROPERTIES Basis : Polyurethane Prepolymer Curing System : Moisture cure Specific Gravity : 22±3 Kg/m3 (ASTM D1622) Tack-Free Time (1 cm width) : 7±3 min (ASTM C1620) Cutting Time (1cm width) : 30-45 min (ASTM C1620) Cure-Time : 24 hours Foam Colour : Light yellow Yield : 30-45 L (ASTM C1536) Fire Class of the Cured Foam : B3 (DIN 4102-1) Thermal Conductivity : 0,036 W/m.k (at 20°C) (DIN 52612) Compression Strength : 0,03 MPa (DIN 53421) Tensile strength : 11.7±0.8 (SO1926-79) Dimensional stability : ±10% (ISO2796/86) Water penetration : 0 (ISO2896-87) Water Absorption : max. 1 vol% (DIN 53428) Can Temperature : min.5°C max. +30°C Temperature Resistance : -40°C to +80°C Application Temperature : -2°C to +30°C The results were obtained by providing optimum environmental conditions.

ABOVE PRICE IS INCLUDING GST 18%.
DESCRIPTION STRONG SEAL 3200 BRONZE General purpose sealant is economic grade single component Acetic cure silicone sealant which vulcanizes on exposure to moisture in the air at room temperature, to produce a flexible elastomeric sealant. It is suitable for all common construction and glazing application. It is easy to apply and offers excellent adhesion to a variety of nonporous substrates such as glass, glazed ceramic tiles and aluminium. It is resistant to ozone, ultra-violet radiation and temperature extremes. KEY PERFORMANCE PROPERTIES ❖ Single component sealant hence easy to use. ❖ Cures at room temperature at ambient humidity conditions. ❖ All temperature gun ability – can be applied in all temperatures. ❖ Excellent resistance to weathering, moisture, ozone, UV, temperature Extremes etc.
TYPICAL PROPERTIES Colour White, Clear, Brown, Grey, Beige, Cream & Clear translucent Consistency Non-Slump Paste Cross Linking System Acetoxy cure Skin Forming Time 7-8 minutes Tack Free Time 20 minutes Specific Gravity <0.92 Hardness (Shore A) 8 Depth Cure Rate (mm/Day) 2mm – 2.5 mm Viscosity Flow Non Sag Tooling Time 15 minutes Tensile Strength 0.60 Elongation % > 350% Young Modulus 0.18 Application Temperature Range - 200C to 1200C Elastic Recovery, % Approx. >40 Tear Strength ASTM D 624, Form B 2N/mm2 Shrinkage DIN 53504 S3A 35%-40% Shelf life in months from production date 12 Months APPLICATION AREAS • Aluminium / Glass and standard glazing • Curtain wall jointing. • Plumbing and Sanitary applications • Metal to metal joints and duct work sealing. • Draught proofing. • Sealing door / window's frames, tiling, • Realizing a flexible joint in assembling sink and decorative parts. • Sealing works in air conditioning systems. • Sealing Shop windows and greenhouses. • All other general purpose sealing applications Application method: Surface must be clean, dry and should be free from oil, grrease, dust and frost. After suitable joint preparation and masking, attach the nozzle to cartridge, cut to required dimension and the sealant is gunned into gap continuously and tooled within 5 minutes. Do not use in totally confined spaces because the sealant requires atmospheric moisture to cure.

ABOVE RATE IS INCLUDING GST 18%
.General description Quick dry electronic cleaning solvent. CRC QD-Contact Cleaner is a stable, inert, high-purity solvent cleaner, formulated for applications where lower flash point solvents may be used, and where sensitive plastics are involved. Based on very fast drying, hydrocarbon solvents without CFC’s, HCFC’s, chlorinated-, fluorinated-, alcohol- or glycol ether components. CRC QD-Contact Cleaner provides a suitable precision cleaning action for sensitive electronics and electrical equipment without risk of costly damage.
Quick drying. • Effectively removes light contaminants, dust, dirt, finger prints, traces of light oil and moisture. • No ozone-depleting action (ODP = 0,00). • Reduces contact resistance, arcing and wear. • Extends the life of sensitive equipment. • Non-conductive and non-corrosive. • Leaves no residue. • Safe on commonly used plastics, rubbers and coatings. • Convenient 360° (upside-down) spray valve for aerosols. • High purity CO2 propellant, giving an active product content of 95 %
3.Applications Ideal for applications where lower flash point solvents may be used and where sensitive plastics are present : • Contactors • Switches • Sensors • Relays • Motor controls • PCB • Terminals • Tape heads • PC’s • Telephones A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC products. 4.Directions • Spray liberally on surface to be cleaned and allow to run off. Use extension tube for precision application. • Use an abrasive on surfaces with carbon deposits or oxidation; remove residue with intermittent spray. Re-lubricate with CRC 2-26 if necessary. • Highly flammable formulation. Do not spray on energized electrical equipment or circuits; de-activate before product application and extinguish all flames, pilot lights and heaters • During use, flammable vapours may accumulate, especially in closed equipment. Use with adequate ventilation and maintain ventilation until vapours are gone. Allow to dry thoroughly before reactivating systems. • Observe care in applications on highly sensitive plastics, adhesive-mounted or stressed parts.
5.Typical product data (without propellant) Appearance : clear liquid Odour : very mild hydrocarbon Distillation range : 60-100°C Flash point (closed cup) : < 0°C Aromatics content : 0,001 % wt Non-volatile content : < 10 ppm Colour (Saybolt) : +30 Specific gravity (@ 20°C) : 0,70 Kauri-Butanol value : 28 Surface tension (@ 25°C) : 20 mN/m Evaporation rate (vs. ether = 1) : 2,7 Vapour density (vs. air = 1) : > 1 Di-electric constant (*) (@ 20°C) : 1,9 6.Packaging Aerosol 12x500 ML

ABOVE PRICE IS INCLUDING GST 18%.
WD-40 Specialist Contact Cleaner is a solution that cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment. It rapidly penetrates hard- to- reach areas and dries quickly without leaving any residue.
• Circuit Boards • Controls • Electrical Assemblies • Printers and Copiers • Switches • Tape Heads and Precision Instruments• Dielectric strength up to 35,000 Volts per 0.1 inch • Fast acting, non-conductive cleaner • Penetrates quickly, fast drying and leaves no residue • RoHS compliance • Perfect for cleaning electrical equipment, contacts and plasticsBOILING POINT (INITIAL) 60˚C SOLUBILITY IN WATER Insoluble EXTREME CLEANING SCORE 63.4% (ASTM D4488 – A2) DIELECTRIC STRENGTH 35,000 volts per 0.1 inch PERCENT VOLATILE 100% FLASH POINT <-23˚C SPECIFIC GRAVITY 0.66 APPEARANCE/ODOR Clear liquid/hydrocarbon odor PH.Isolate all electricity and allow hot surfaces to cool. Make sure all stored power is drained from the system. Shake can well before use. Hold can 15cm to 20cm away from the surface and spray directly onto the electronic device or circuit board to eliminate and remove contaminants that may cause loss of electrical contact. Tilt surface while cleaning and allow any excess cleaner to run off. Allow product to dry completely and thoroughly vent the system before restoring power

ABOVE PRICE INCLUDING GST 18%.

ABOVE PRICE IS INCLUDING GST 18%.

ABOVE PRICE IS INCLUDING GST 18%.
Description OKS 2621 is a contact cleaner to remove soiling that can cause creepage currents. Application tips Disconnect voltage and shunt electrostatic charge prior to application. Spray on areas to be cleaned until the desired cleanliness is reached. Components are generally considered to be compatible with plastics, but because of the big variety of materials we recommend you to check the resistance before use. Packaging Technical data Standard Conditions Unit Value Main components base oil aliphatic hydrocarbons Application related technical data colour colourless density (at 20°C) DIN EN ISO 3838 g/cm³ 0.66 Applications Removal of loose oxide and electrode-erosion residues, dust deposits or creepage currents which cause soiling in moving contact areas such as motor-vehicle ignition distributors, relay contacts, resistance or potentiometer slideways, in static contact areas such as motor-vehicle spark plugs, plug-in connections, sliding and screw connections, in or on electrical and electronic equipment or devices of all kinds Branches Logistics Municipal services Rail vehicle technology Glass and foundry industry Iron and steel industry Maintenance and servicing Rubber and plastic processing Chemical industry Shipbuilding and marine technology Paper and packaging industry Plant and machine (tool) engineering Application tips Disconnect voltage and shunt electrostatic charge prior to application. Spray on areas to be cleaned until the desired cleanliness is reached. Components are generally considered to be compatible with plastics, but because of the big variety of materials we recommend you to check the resistance before use. Packaging Technical data Standard Conditions Unit Value Main components base oil aliphatic hydrocarbons Application related technical data colour colourless density (at 20°C) DIN EN ISO 3838 g/cm³ 0.66 Applications Removal of loose oxide and electrode-erosion residues, dust deposits or creepage currents which cause soiling in moving contact areas such as motor-vehicle ignition distributors, relay contacts, resistance or potentiometer slideways, in static contact areas such as motor-vehicle spark plugs, plug-in connections, sliding and screw connections, in or on electrical and electronic equipment or devices of all kinds Branches Logistics Municipal services Rail vehicle technology Glass and foundry industry Iron and steel industry Maintenance and servicing Rubber and plastic processing Chemical industry Shipbuilding and marine technology Paper and packaging industry Plant and machine (tool) engineering Advantages and benefits Highly effective due to outstanding cleaning properties Broad range of uses for all maintenance and customer service work in electrical sector Fast evaporation after striking surface 400 ml SprayTechnical data Standard Conditions Unit Value Main components base oil aliphatic hydrocarbons Application related technical data colour colourless density (at 20°C) DIN EN ISO 3838 g/cm³ 0.66 Advantages and benefits Highly effective due to outstanding cleaning properties Broad range of uses for all maintenance and customer service work in electrical sector Fast evaporation after striking surface

ABOVE PRICE IS INCLUDING GST. 400 ML PACK

ABOVE PRICE IS INCLUDING GST 18% 400 ML PACKTest Items Unit Test Results Assess 1 Internal Pressure MPa 0.6 Pass 2 Leak test Immerged in Water @50 OC + 2 OC No leakage Pass 3 Emission Rate ％ 97.9 Pass 4 Paint film appearance ---- Ordinary color: Uniform color, smooth and clean Pass 5 Drying time min Tack free time: 10 Hard work time: 30 Complete Dry: 18 to 24 hrs Pass 6 Gloss (60°) % 105 Pass 7 Hardness ---- HB (Pencil hardness） Pass 8 Adhesive force ---- Level 1 Pass 9 Impact Resistance ---- >50 Pass 10 Non-volatile Ingredients % 28 Pass 11 Resistance to Water ---- After the sample is soaked in water for 24 hours, it will not foam or fall off. The color of the paint filmis allowed to turn slightly white andrecover within 2 hours. Pass 12 Lead (Pb) mg/kg Not detected Pass 13 Cadmium (Cd) mg/kg Not detected Pass 14 Mercury (Hg) mg/kg Not detected Pass 15 Hexavalent Chromium (Cr6+) mg/kg Not detected Pass 16 Benzene % Not detected Pass The limits of detection are as follows:Lead (Pb): 2.5 mg/kg, Cadmium (Cd): 2.5 mg/kg, Mercury (Hg): 0.5 mg/kg, Hexavalent chromium (Cr ): 4.0 mg/kg,Benzene: 0.001%.

ABOVE PRICE IS INCLUDING GST 18%.

Spray Paint is acrylic-based aerosol paint, ideal for painting scratches and dents formed during mounting of metal tiles and other types of roofing. It is quick drying, smooth finish & high gloss.

Also can be used for painting metal, wood, plastics stone and concrete, porcelain, leather, automotive and motorcycle equipment, etc. Protects against corrosion, weather and wear resistant.

pray Paint is acrylic-based aerosol paint, ideal for painting scratches and dents formed during mounting of metal tiles and other types of roofing. It is quick drying, smooth finish & high gloss.

Also can be used for painting metal, wood, plastics stone and concrete, porcelain, leather, automotive and motorcycle equipment, etc. Protects against corrosion, weather and wear resistant.

 

ABOVE PRICE INCLUDING GST 18%
Description Dry and clean protective film fast to handling on a wax basis for metals that can be removed easily and protects against corrosion reliably up to two years. Application tips For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. The surfaces must be bright metal and dry. Stir OKS 2100 thoroughly before use. Apply in an evenly thin film to the prepared surfaces, preferably by spraying or dipping, in individual cases also by brush. Shake OKS 2101 well and spray on evenly. Avoid local excesses. Drying times as specified in the following technical data. Packaging Applications Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (tropics, ocean, industrial atmosphere) Ideal on-call and storage protection for spare parts with possibility of direction installation Branches Chemical industry Rubber and plastic processing Plant and machine (tool) engineering Rail vehicle technology Logistics Glass and foundry industry Shipbuilding and marine technology Municipal services Paper and packaging industry Iron and steel industry Advantages and benefits Highly effective due to good film-forming properties Outstanding corrosion and oxidation protection No degreasing prior to commissioning required, as compatible with all lubricants Waterproof and resistant to weathering Suitable for all climate zones No surface discolouration 400 ml Spray

ABOVE PRICE INCLUDING GST18%.

ABOVE PRICE IS INCLUDING GST 18%. 500 ML PACK.
OKS 9341 Chain Lube Spray is designed for long lasting lubrication of Motorcycle chains, to withstand severe environmental conditions as existing on roads. It is fortified with additives that give good adhesion, protection against corrosion & emergency lubricating properties.Applications  Motorcycle chains Advantages and benefits  Penetrates and lubricates the chain well  Highly adhesive and effective even at very high speeds.  Reduces friction and improves power transmission  Reduces noise and vibration of chain  Forms a strong protective coating and does not drip  Protects against water / dirt and prevents corrosion  Increases chain life with reduction in wearApplication Tips For best result, please follow the below procedure.  Place the bike on center stand  Clean chain using OKS 2601 – Aerosol spray can. Spray on full length of chain by rolling the rear wheel in reverse direction. Gently wipe the chain by using a clean dry cloth.  Spray a light coating of OKS 9341 Chain Lube Spray using extension tube on full length of chain by rolling the rear wheel in reverse direction.  Spray lubricant inside the chain between rollers and bushes.  Also on both sides of chain.  Shake vertically OKS 9341 Chain Lube Spray can well before use. Shake till the noise of the steel ball is heard uniformly.  After each use, turn the can upside down and spray till only the propellant gas comes out.OKS 9341 Chain Lube Spray Version: V1.06.2015 En Page 2/2 Technical Data Standard Conditions Unit Value Base oil Type Mineral oil Dynamic Viscosity Brookfield mm²/s 10000 - 12000 Application-specific data Density In-house +27°C g/cc 0.80 - 0.88 Colour Visual Creamish Coloured Spray Pattern Visual Jet Spray Rate In-house g/sec 1.6 – 2.0