Lube Adhesive & Engineering Co.

Above price is including of Gst 18%.

MOQ : 200 NO.
I. Product DescriptionCRC 2-26® is a versatile, plastic safe, multi-purpose precision lubricant, penetrant and corrosion inhibitor. Its uniqueviscosity allows it to cover more surface area and penetrate deep into the surface of all metals, including steel,copper, brass and aluminum alloys. 2-26® displaces moisture and leaves a thin, long lasting film to protect againstcorrosion.
II ApplicationsRecommended for use on electrical connectors, relays, circuit breakers, transformers, switchgear, motors,generators, controls, instruments, communication assemblies, electronics, alarm systems, starters, tubing, castings,gears, weld rod, wire, fixtures, dies, jigs, shim stock, chucks, drill rod, heat treated parts, machined surfaces, finishedwelds, aluminum extrusions, air actuated tools, conveyors, frozen joints, locks, hoists, etc. Excellent for use aroundmodern plastics and insulators. Recommended for restoring electrical properties to water or flood damagedequipment.
III. Features & Benefits• All-In-One Formula. Fills the need for lubricant, penetrant, light duty cleaner and corrosion inhibitor in oneproduct.• Displaces Moisture. Prevents corrosion to improve equipment life and performance.• Plastic Safe. Allows one product to be used in all applications without risk of costly damage to most sensitivemodern plastics.• 360º Valve. Product can be sprayed from any position – even upside down.• M.S.D.[L.]™-Material Safety Data Label. Provides instant access to current safety information should anaccident or OSHA inspection occur. Helps comply with OSHA Hazard Communications Standard 29 CFR1910.1200.
IV. Physical Properties without propellantFlash Point 192ºF / 89°C TCC Boiling Point (Initial) 435ºF / 224°COdor Mild Petroleum Solubility Neg. in waterAppearance Amber liquid VOC % 0Vapor Density >air Specific Gravity 0.82VOC Content (Fed) 0 g/L Temperature Range Max 250°FSara Title III, Sect. 313 Chemicals No Propellant CO2Prop 65 No
V. Specifications and Approvals• NSF H2 Registered for use in meat and poultry plants.• NSN# 6850-00-874-5847.
VI. Performance CharacteristicsType of Film Non-dryingFilm Thickness 0.025 to 0.075 milsBellcore Test (Plastic Compatibility) PassedASTM D-877 (Dielectric Strength) 51,300 voltsASTM D-56 (Flash Point) 192°F (TCC)ASTM D-3233 (Falex Load Test) 1,500 lbs.Corrosion Inhibitor Indoor Only/up to 9 monthsFerrous and Non-Ferrous Metals
VII. Directions• Spray light even coat to protect surfaces and to seal out moisture.• Apply liberally to loosen rusted parts.• Spray wet surfaces until run-off is clear and moisture free.• For personal safety do not use on energized equipment. Allow to dry at least 4 to 6 hours beforeenergizing.• Contact CRC Technical Service for directions for restoring electrical properties to water or flooddamaged equipment.
VIII. Package DescriptionPart Number Container Size02004 6 oz Aerosol02005 16 oz Aerosol02006 1 Gallon Bottle02007 16 oz Spray Bottle02009 5 Gallon Pail02011 55 Gallon Drum02024 2 oz AerosolX. Special Use WarningsAerosol CansDo not puncture, incinerate or store above 120°F. Exposure to high temperatures may cause can to burst. Do notplace in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all liveelectrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure toobserve this warning may result in serious injury from flash fire and/or electrical shock.GeneralUse only in well ventilated area. Ventilation may be improved by opening a window or door or providing mechanicalassistance. Avoid continuous breathing of vapor and spray mist.

Additional Information:

• Production Capacity: AVAILABLE
• Delivery Time: WITHIN WEEK
• Packaging Details: 500 ML PACK MOQ 24 NO.

DESCRIPTION??? High Performance ON - LINE Electrical Contact Cleaner SprayPROPERTIES??? Penetrates well & effectively removes dirt, dust, oil, grease flux and other contamination??? Fast evaporating cleaner??? Leaves no residue??? Non-corrosive and non-staining??? Harmless to plastics*??? Safe and easy to apply??? Ozone friendly propellantAPPLICATIONS??? Electrical switches, control panels, circuit breakers, motors, contacts, relays, generators, terminals, sensors, measuring instruments, optical instruments , etc.,SPECIFICATIONSProperty ECC 500 -ON LINE Appearance Clear Liquid Density @ 27°C (g/cc) 1.10 Propellant Non-CFC Net content 500 ml /300 g Shelf Life 12 months Packing 500 ML Spray??? Check the plastic compatibility

Additional Information:

• Production Capacity: AVAILABLE
• Delivery Time: 10 DAYS
• Packaging Details: 500 ML

ABOVE PRICE IS INCLUDING 18%.ABOVE PRICE IS 350ML PACK.
DescriptionMAAX-Stainless Steel Cleaner and Polish 102 is a foam based ready to use aerosol to clean grease, burnt oil, dirt, dust, smudges, fingerprints and watermarks from stainless steel, brass, aluminum and chrome surfaces.Properties??? High strength 3 In One Formula to CLEAN, POLISH and PROTECT the metal surfaces??? Provides streak free and scratch free shiny finish??? Leaves a thin protective film??? Leaves no residue or greasy film??? Resists stains, water spots, grease and fingerprints??? Contains no-acids and no-abrasives??? Pleasant fragrance??? Safe and easy to applyApplications??? Specially designed for use on all types of stainless steel including escalators, elevators, doors, metal trim, window frames, corridor guards, autoclaves, bathroom fixtures, grills, hoods, ovens, dishwashers, refrigerators , sterilizers and variety of other equipment’s, etc.,??? Also used on brass, aluminum, chrome, other shiny metal surfaces, ceramics and laminated plastics.Method of Applications??? Shake well before use??? Test the product compatibility with painted or coated surfaces prior to the application??? Hold the can upright 10-20 cm away from the surface??? Allow sufficient time for the cleaner to penetrate the contamination (15 -30 seconds)??? Wipe the surface and polish till gets dry??? For Heavy soil cleaning, spray in to mild scrubbing pad and rub the surfaces for better results??? Do not apply on hot surfaces??? Store below 50 Deg C , away from direct sun lightSpecificationsProperty S102-STAINLESS CLEANER & POLISHColourWhite Emulsion – FoamSpecific Gravity (g/cc)1.00 ± 0.02BaseWhite Mineral oil with Surface active agentsSpray Pattern TypeFoam SpraypH8-10Water SolubilitySolubleFlash PointNot ApplicablePropellant TypeCFC FreePacking340 ml & 550 ml

Additional Information:

• Delivery Time: AVAILABLE
• Packaging Details: 340 ML /305GM & 550 ML & 475GM

ABOVE PRICE IS INVLUDING GST 18%.
DescriptionMAAX-Stainless Steel Cleaner and Polish 101 is an Oil based ready to use aerosol to clean grease, burnt oil, dirt, dust, smudges, fingerprints and watermarks from stainless steel, brass, aluminum and chrome surfaces.Properties High strength 3 In One Formula to CLEAN, POLISH and PROTECT the metal surfaces Provides streak free and scratch free shiny finish??? Leaves a thin protective film??? Leaves no residue or greasy film Resists stains, water spots, grease and fingerprints Contains no-acids and no-abrasives??? Pleasant fragrance??? Safe and easy to applyApplications Specially designed for use on all types of stainless steel including escalators, elevators, doors, metal trim, window frames, corridor guards, autoclaves, bathroom fixtures, grills, hoods, ovens, dishwashers, refrigerators , sterilizers and variety of other equipment’s, etc.,??? Also used on brass, aluminum, chrome, other shiny metal surfaces, ceramics and laminated plastics.Method of Applications??? Shake well before use??? Test the product compatibility with painted or coated surfaces prior to the application??? Hold the can upright 10-20 cm away from the surface??? Allow sufficient time for the cleaner to penetrate the contamination (15 -30 seconds)??? Wipe the surface and polish till gets dry??? For Heavy soil cleaning, spray in to mild scrubbing pad and rub the surfaces for better results??? Do not apply on hot surfaces??? Store below 50 Deg C , away from direct sun lightSpecificationsProperty S101-STAINLESS CLEANER & POLISHColourMild FoamySpecific Gravity (g/cc)0.80 ± 0.02BaseWhite Mineral oil with Surface active agentsWater SolubilityMisciblePropellant TypeCFC FreePacking550 mlDescriptionMAAX-Stainless Steel Cleaner and Polish 101 is an Oil based ready to use aerosol to clean grease, burnt oil, dirt, dust, smudges, fingerprints and watermarks from stainless steel, brass, aluminum and chrome surfaces.Properties??? High strength 3 In One Formula to CLEAN, POLISH and PROTECT the metal surfaces Provides streak free and scratch free shiny finish??? Leaves a thin protective film??? Leaves no residue or greasy film Resists stains, water spots, grease and fingerprints Contains no-acids and no-abrasives??? Pleasant fragrance??? Safe and easy to applyApplications Specially designed for use on all types of stainless steel including escalators, elevators, doors, metal trim, window frames, corridor guards, autoclaves, bathroom fixtures, grills, hoods, ovens, dishwashers, refrigerators , sterilizers and variety of other equipment’s, etc.,??? Also used on brass, aluminum, chrome, other shiny metal surfaces, ceramics and laminated plastics.Method of Applications??? Shake well before use??? Test the product compatibility with painted or coated surfaces prior to the application??? Hold the can upright 10-20 cm away from the surface??? Allow sufficient time for the cleaner to penetrate the contamination (15 -30 seconds)??? Wipe the surface and polish till gets dry??? For Heavy soil cleaning, spray in to mild scrubbing pad and rub the surfaces for better results??? Do not apply on hot surfaces??? Store below 50 Deg C , away from direct sun lightSpecificationsProperty S101-STAINLESS CLEANER & POLISHColourMild FoamySpecific Gravity (g/cc)0.80 ± 0.02BaseWhite Mineral oil with Surface active agentsWater SolubilityMisciblePropellant TypeCFC FreePacking550 ml

Additional Information:

• Delivery Time: AVAILABLE
• Packaging Details: 550ML PACK

ABOVE PRICE IS INCLUDING GST 18%.
ceramic insulators' are prone to very high surface leakage currents and flashovers when installed in polluted and humid environmental conditions, e.g. sea coast environment and near cement, fertilizer and chemical plants. Also, ceramic insulators are prone to damage during transportation, installation and through vandalism.Kli-nit ® CT-2 Electrical Systems Cleaner can be used to remove dust, grime, pollutants, bird droppings, etc from the insulators.A remedy for pollution flashovers of insulators Creepage Extenders increase the flashover performance of insulators by reducing the surface electric stress, reducing the leakage current and increasing the electric strength of the insulators. This is however an expensive proposition.Pollution flashovers oorrgeion.Changing environments cause increases in pollution levels which lead to excessive contamination of high voltage insulators. This may lead to unacceptably frequent flashovers if the creepage length and general design is inadequate. A replacement insulator having greater electric strength may be installed but the costs of this are high especially when a complete assembly, like a bushing, is involved.Kli-nit ® CT-2 Electrical Systems Cleaner reduces the contamination level, or surface treatments. Use of either grease or rubbery coatings or incorrect oil based products which smother the dirt or make the surface less wettable, can be unacceptable and in some circumstances washing may promote flashover. Grease is a fire risk when it becomes choked with pollution and its removal is unpleasant and expensive.Surge Arresters Resin cast Surge arresters out perform porcelain housed distribution arresters which are prone to failure through moisture ingress, have ppollution performance, poor heat dissipation, poor partial dischaperformance and are adversely affected by handling and transportat able Jointingmodern jointing system must fulfil requirements such as these :Few, prefabricated components for easy, reliable installation.tions and cable constructions.cables ofnductor jointing methods.However, one thing the jointing lacks is clear cut instructions on the kind of cleaning,chemicals and greases used, etc. All experienced jointers use abrasives to clean the conductor, whichis now. Kli-nit ® CT-2 evaporateswithin shigh-voltage power systems has shown thatdefective electrical connections are involved in many circuit or equipment failures.aluminum and copper conductors exposed to air. Once the oxides are stabilized,tion ofis generally broken down by reasonably low valuesof contact pressure. Unless the copper is very badly oxidized, good contact can bey contact pressure and forms less readilyat elevated temperature. Thus it is good practice to regularly clean silver copper contactm oxide is a hard, high-resistance film that forms immediately onthe surface of aluminum exposed to air. This tough film gives aluminum its good corrosiona days Aluminum. A tough, very hard. invisible, and high resistance oxide,which is both impermeable and protective in nature, forms quickly on exposedaluminum. Thus the jointing work is to be done rapidly.Kli-nit ® CT-2 Electrical Systems Cleaner is used to clean the cable of allgreases, oily stains, insulation burrs and foreign particles20 seconds, making the joint ready for casting. The easy to use aerosol iespecially useful in ducts and man holes, where there is limited space.Contactors, Relays, SwitchesOperating experience withOXIDATION OF CONDUCTORS. High-resistance oxides form very quickly onthey prevent further oxidation of the parent metal; however, due to this highelectrical resistance, these oxides must be broken or removed before making upconnections. Oxidation-inhibiting joint compounds are used to prevent reoxidathe metals in the connections.

Additional Information:

• Delivery Time: within 2 days

GASKET REMOVER PRO IS BLEND OF POWERFUL SOLVENTS FORMULATED FOR A FAST REMOVAL OF GASKET CEMENT ADHESIVES AND SEALANTS.

Additional Information:

• Delivery Time: WITHIN TWO DAYS
• Packaging Details: 400 ML

ABOVE PRICE IS INCLUDING GST 18%.
SKL-SP2Solvent Removable Visible Dye PenetrantSKL-SP2 is a solvent removable penetrant for portability, especially for welding operations, and ispost emulsifiable for greater resolution of flaw indications. It produces a visible red color contrast, andfeatures outstanding penetrating characteristics. SKL-SP2 is highly reliable at locating surface open flawsand discontinuities and can be used on non-porous ceramics and similar materials. Typically used onwelds, forgings, pressure vessels, castings, general metal work, leak testing, and in power plants andconstruction applications.SKL-SP2 is listed on the QPL SAE AMS 2644 Qualified Product List.BENEFITSFastest inspection processing• Reliable, simple 3-step process is aconvenient and easy-to-use solution forpreventative maintenance and controlchecks• Quickly and completely covers the entiretest surface due to high surface wetting• Remove excess penetrant without waterto eliminate the need to dry parts beforeapplying developerDependable and convenient to use• Easy to carry and use in the field withthe convenient aerosol cans which arecarefully designed for consistent, evencoverage and maximum test area coverage• Use in all conditions without the need fordarkness or UV lightsWide application versatility• Inspect a wide range of componentswithout fear of corrosion or specificationnon-conformance• Meets AMS 2644 and is NDT-approved forprofessional industrial applicationsMaximum indication detection• Produces strong, vibrant indications thanksto the bright, vibrant red color, especiallywhen used with SKD-S2 solvent-baseddeveloperMaximize operator comfort and safety• Promotes better inspection quality byproviding the operator with a morecomfortable work environment• Reduces discomfort from strong odors• Exceeds all EHS requirements, does notcontain NPEs or phthalatesSPECIFICATION COMPLIANCE• AECL• AMS 2644• ASME• ASTM E1417• ASTM E165• ISO 3452• MIL-STD-2132• MIL-STD-271• NAVSEA T9074-AS-GIB-010/271• NAVSEA 250-1500-1• QPL SAE AMS 2644Product Data SheetRevised: December 2017 FEATURES• Solvent removeable• ISO 3452 sensitivity level #2• Can be used for Method B, Method C andMethod D• Simple, easy-to-use process• Vivid, high-contrast red color• Superior flaw resolution• Good surface wetting• Optimized capillary action• Works in visible light• Very low toxicity• Low odor• NDT-spec compliantPROPERTIESFlash Point > 200°F / 93°CDensity 0.85 g/cc / 7.04 lb/galViscosity(at 100°F / 38°C) 3.80 csNPE-Free YesUSE RECOMMENDATIONSNDT Method Penetrant Testing, Visible DyeType Type 2Method(s) B / C / DSensitivityLevel ISO 3452 sensitivity level #2RequiredEquipment No special equipment neededTemperatureRange 40 to 125°F / 4 to 52°CCoverage1 aerosol can will cover approximately65 ft2 / 6 m21 gal will cover approximately1,200 ft2 / 111 m2APPLICATIONSDefect location: open to surfaceIdeal for:• Wide range of applications• Castings• Forgings• Welds• Pressure vessels• Metalworking• Automotive maintenance• Tubular goods• Leak testing• Ferrous and non-ferrous metals• Non-porous ceramicsDefect examples:• Cracks• Leaks• Incomplete weld penetration• Incomplete weld fusion• Undercutting• Slag inclusions• Flux inclusions• Weld porosityPACKAGINGAerosol can, case of 12 01-5155-781 gal / 3.78 L jug, case of 4 01-5155-355 gal / 18.9 L pail 01-5155-4055 gal / 208 L drum 01-5155-45HEALTH AND SAFETYReview all relevant health and safety informationbefore using this product.

Additional Information:

• Delivery Time: 3 TO 4 DAYS
• Packaging Details: 330 ML PACK

MAAX▪ALL CLEANCleaner & DegreaserDESCRIPTION ALL CLEAN is a high performance cleaner and degreaser for all types of Industrial cleaning purpose. It has been manufactured from specially selected solvents which provide superior cleaning of oil, grease, dirt, wax and light adhesive particles.PROPERTIES High performance Cleaner & Degreaser Instantly evaporates Leaves no residue Non-toxic and non-staining Eco-friendly and odour free Safe and easy to applyAPPLICATIONS Auto Components, Bearings, Castings, Chains, Chucks, Compressors, Cylinders, Dies, Drill rods, Engines, Fasteners, Forgings, Impellers, Machinery, Measuring Instruments, Moulds, Pipes, Piston, Shafts, Spindles, Tanks, Tools, Valves and Vessels. Electro Mechanical Assembly, Contacts, Terminals, Relay Switches and Generators.SPECIFICATIONSProperty MAAX- ALL CLEAN Colour Clear Density@ 25°C 0.70±0.03 Pour Point -30°C Flash Point +50°C Shelf Life 12 Months Packing 500ml Spray

Additional Information:

• Delivery Time: within 2 days

GST INCLUSIVE 18%
LOCTITE® SF 790™ is a solvent formulation designed to remove baked-on chemical gaskets, gasket cements and conventional gasket materials from metal surfaces. Product Features LOCTITE® SF 790™ is a chemical liquid that works to remove pre-cut conventional gasket cements as well as formedin-place chemical gaskets. LOCTITE® SF 790™ is supplied in an aerosol which enables spray application on to intricate shapes with maximum penetration. Also, the product will not run off, even on vertical surfaces. LOCTITE® SF 790™ is ideal for removing:  Baked-on gaskets and gasket cements from any type of metal surface.  Chemical formed-in-place gaskets, including RTV silicone and anaerobic materials.  Gaskets from aluminum components without scraping or damaging machine surfaces.  Gaskets from small to difficult-to-reach components.  High temperature engine paints prior to repairing.  Built-up carbon deposits from interior engine/combustion surfaces. ??? Baked-on grease and oil deposits (excellent pre-cleaner prior to solvent washing - keeps solvent baths cleaner, longer).  Paint and varnish from wood surfaces (excellent for removing surface coating from delicate wood, carved surfaces without scraping or damaging surfaces).

Additional Information:

• Delivery Time: WHITHIN TWO DAYS
• Packaging Details: GST 18% EXTRA

ABOVE PRICE INCLUDING GST 18%.

• Magnivue Dye Penetrant Test Spray is available as a 3 part system for quick and easy visual detection of flaws and cracks. Each set consists of a Penetrant Spray, a Cleaner Spray and a Developer Spray.
• The Cleaner is a powerful, quick drying, designed to clean/degrease the substrate and also to remove the excess penetrant. The Penetrant is a red dye solution which penetrates into even the tiniest defect or crack. The Developer is a white coating which contrasts with the Penetrant to highlight the flaw.
• Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment. It is ideal for use during welding, repairs and general maintenance.
• Meets requirements of IS 3658, IS 12889, ASME B & PV Code Sec V, ASTM E 165, E 1220 and E 1417 for: Colour Contrast/Visible Red Type II Method C Solvent Removable Penetrant, Non Aqueous Non Halogenated Class II Wet Developer, Solvent Cleaner for Type II Method C Visible Dye Penetrant.
• Meets RDSO Specification no. M&C/NDT/105/2001 for Indian Railways. Sulphur and Chlorine content is below 25ppm each in compliance with the prescribed standards mentioned above. Non-corrosive to most metals.

Specifications for this item KEY FEATURES

• Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection.
• Meets RDSO Specification no. M&C/NDT/105/2001
• Extremely low chlorine and sulphur contents.
• Non-corrosive to most metals.

APPLICATIONS

• Quick and easy visual detection of flaws and cracks in various metallic surfaces.
• Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment.
• It is ideal for use during welding, repairs and general maintenance. (1 Ltr)
• Item Code: FM9910

Additional Information:

• Delivery Time: WITHIN WEEK
• Packaging Details: 400 ML

ABOVE PRICE IS INCLUDING GST 18%.
Description OKS 2901 is a clean, light-coloured film for increasing tensile strength and car of many kinds of belts.Applications Increases tensile force by up to 50 % for all kinds of V-belts, round and flat belts on fans, compressors, pumps, ventilators, mills etc. Protects against drying out and wear, prevents belt squeaking and slip
Advantages and benefits Increases service life Prevents squeaking Prevents slip Increases belt tension forceBranches Logistics Iron and steel industry Rubber and plastic processing Glass and foundry industry Shipbuilding and marine technology Paper and packaging industry Chemical industry Rail vehicle technology Maintenance and servicing Plant and machine (tool) engineering Municipal services
Application tips For optimum results clean belt carefully, best way is to clean mechanically first and then with Universal Cleaner OKS 2610/2611. Spray evenly on the belt. Let product take effect for approx. 30 min. before use. If necessary, repeat application. Belts made of SBR and CR are not compatible to OKS 2901.Packaging:400 ml Spray
OKS 2901 Belt Tuning, Spray Technical data Standard Conditions Unit Value Main components base oil adhesive oil solvent special boiling point gasoline Application related technical data upper operating temperature °C 80 colour yellowish density (at 20°C) DIN 51 757 g/cm³ 0.74 

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: 500 ML