Lube Adhesive & Engineering Co.

GST EXTRA PRICE IS 1 KG PACK.

MAGICSIL 700High Performance Silicone GreasePROPERTIES??? Low volatility & very low pressure base??? Excellent cold & hot water resistant??? Good chemical resistant property??? Constant consistency over wide range of temperature??? Does not carbonize??? Very good di-electric property??? Excellent sealing property makes it an ideal for high vacuum and high pressure applications??? Chemically inert & offers good resistance to solvents??? Compatibility with most plastics and rubber??? Wide operating temperature (-40 °C to +260 °C )APPLICATIONS??? Excellent lubricant, sealing and insulating paste for plastic to plastic, metal to plastic, metal to rubber, ’O’ ring, rubber seals, shut off valves, water & chemical tapes and wide industrial applications.??? High performance valve and packing grease??? Used as a sealant and lubricant for glass joints, stop-cocks, electrical and electronic switch gears, cables, control valves, relays, ceramic plug cocks, food and chemical processing equipment.SPECIFICATIONSProperty MAGICSIL 700 Appearance White translucent Base Silicone Thickener Inorganic NLGI Grade 1/2 Worked Penetration @27°C in ASTM D217 (0.1 mm) 290-310 Evaporation, percent maximum 24 hrs at 2000C 2 Apparent Density, gms/cc 1±0.02 Bleed, Percent maximum :24 hours at 200 °C 0.5 Solidification point, 0C below -45 Copper Strip Corrosion rating under ASTM D 130 1 a Dropping Point, 0C above +270 Packing, kg 1/5/18/180

Additional Information:

• Production Capacity: IMMEDIATE
• Delivery Time: WITHIN 3 DAYS
• Packaging Details: 1KG / 5KG / 18KG / 180KG

ABOVE PRICE IS INCLUDING GST 18%.

PRODUCT DESCRIPTION Technology Silicone Chemical type Non curing Appearance Smooth paste Colour Transparent Application Lubrication / Vacuum sealing.
Anabond 662 is a non-curing silicone paste that seals, lubricates, protects, waterproofs, and electrically insulates metal, rubber, and plastic parts. It is used as a moisture barrier for electrical contacts, a rubber and plastic lubricant, a mold release agent, and lubricant for shafts and valve stems. It also protects electrical connections against water infiltration. wide operating temperature range combined with good lubricating and excellent dielectric properties.
Typical Properties Penetration at 30 ± 1°C ATM*-R077 dops Solid content at 105±3°C ATM-R010 % Sagging at 2000C, for 2hrs ATM R051 Flash Point Refer MSDS Operating parameters
Application temperature  C In service temperature  C Short exposure  C General Information This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Handling Before handling, read product safety data sheets (MSDS) and container labels for safe use. Anabond® 662 Japanese Industrial standard, ASTM – American Society for testing and materials, BS Lubrication / Vacuum sealing curing silicone paste that seals, lubricates, protects, waterproofs, and electrically insulates metal, rubber, and plastic parts. It is used as a moisture barrier for electrical contacts, a rubber and plastic lubricant, a mold release agent, and a packing lubricant for shafts and valve stems. It also protects electrical connections against water infiltration. It has a wide operating temperature range combined with good lubricating and excellent dielectric properties. 200 – 300 97.0 – 99.8 Non sag Refer MSDS 10 to 40 -50 to +200 220
General Information This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Substrate preparation Surfaces to be adhered or sealed should be free of dirt, oil and other contaminants. For best performance the surface with solvent such as isopropyl alcohol acetone or methyl ethyl ketone cloth. Method of application Adhesive/sealant can be applied dir container. The material may be applied by brushing, spraying, or dabbing the product on the surface to be lubricated or sealed thickness. Excess material can be easily wiped away with cloth or non-polar solvents.
Storage The optimal storage condition is 8 below or more than the temperature specified, has impact on the product properties. Material removed from containers may be contaminated during use. Do not refill the product to the container. Keep the container tightly closed when not in use. If additional information is required, please contact our local customer service representative. Shelf life When stored at or below 300C, in the original unopened containers, this product has a shelf life of from the date of manufacture. Packing Adhesive/sealant is available in & 20 kg in HDPE container.

Additional Information:

• Production Capacity: STOCK AVAILABLE
• Delivery Time: IMMEDIATE
• Packaging Details: 100g / 250g / 500g / 1kg/20 KG

Benefits:MOLYGRAPH® TCZ-40 / TCZ-50 / TCZ-60 contains over 40%, 50% and 60% finely powdered highpurity zinc. This ensures a leak proof seal even in extreme pressures. The zinc compounds prevent gallingand seizing and the need for excess Torque application to achieve break-out. These do not build up onthreads and protect against additional make up. Chosen additives help the compounds guard againstcorrosion and they are easily brushable, resist water absorption and retain consistency over a wide rangetemperature band.Service Rating: (-) 12°C [0°F] to (+) 177°C [350°F] .Recommendation: For use on Tool joints, Drill collars and other Rotary Shouldered connections.Compound conforms to API RP 7A1.Characteristics TCZ-40 TCZ-50 TCZ-60Appearance Smooth Textured Smooth Textured Smooth Textured Colour Grey/Greyish Green Grey/Greyish Green Grey/Greyish Green Base Lithium Lithium Lithium Flash Point (Base Oil) 200°C [392°F] 200°C [392°F] 200°C [392°F]Density 1.56 g/cc 1.6 g/cc 1.66 g/cc Unworked Penetration(ASTM D217) 290-310 290-310 290-310Dropping Point(ASTM D566) [TYP.] 180°C [356°F] 180°C [356°F] 180°C [356°F]Brushability upto [typ.] (-) 12°C [10°F] (-) 12°C [ 10°F] (-) 12°C [10°F]Zinc Content 40% 50% 60%Shelf Life 12 months 12 months 12 months Do not use on Oxygen lines or in atmospheres that have high content of Oxygen.

Additional Information:

• Delivery Time: within 2 days

Gst 18 % including. Freight extra
features• high oxidation resistancewide service temperaturerange (73°c to +180°c)•• good low-temperature performance• compatible with many plastics• water resistant
lubricating grease for metal/metal, metal/plastic combinationsinvolving slow to mediumfastmovements and light load,especially over a wide range of temperaturesstandard* unit resultapplication• used successfully for rollers in mobile refrigerating equipment andrefrigerating plants, control cables, electric clocks, motors, windscreen wipermotors, vehicle starter motors, photographic and optical equipment, surveyinginstruments.
composition• silicone oil• lithium soap
typical propertiesspecification writers: these values are not intended for use in preparing specifications. Please contact your local dow corning sales representative prior to writing specificationson this product. Testlubricating grease for metal/metal, metal/plastic combinationsinvolving slow to mediumfastmovements and light load,especially over a wide range of temperaturesstandard* unit resultapplication• used successfully for rollers in mobile refrigerating equipment andrefrigerating plants, control cables, electric clocks, motors, windscreen wipermotors, vehicle starter motors, photographic and optical equipment, surveyinginstruments. The dye changes color on standing. Thiscolor change does not affect theserviceability of the greasecolor pinkconsistency, density, viscositydin 51 818 nlgi consistency class 1iso 2137 worked penetration mm/10 300340iso 2811 density at 20°c g/ml 1. 0din 51 562 base oil viscosity at 25°c mm²/s 100temperatureservice temperature °c 73to +180iso 2176 drop point °c 220astm- low temperature torque test at -73°cd-1478-80initial breakawaytorque nm 130x10ª³torque after 20 minutes running time nm 13x10ª³load-carrying capacityfour-ball tester (vka)din 51 350 pt. 4 weld load n 1400oil separationdin 51 817 standard test, 7 days at 40°c % 3. 2* astm: american society for testing and materials. Iso: international standardisation organisation. Din: deutsche industrie norm. Features• high oxidation resistancewide service temperaturerange (73°c to +180°c)•• good low-temperature performance• compatible with many plastics• water resistantcomposition• silicone oil• lithium soaphow to usehow to applyclean points of contact. As is usualwith lubricating greases, apply bymeans of a brush, spatula, orautomatic lubrication device. Can beused in central lubrication systems. Do not mix with other greases. Because of the variation of plasticquality, compatibility tests should becarried out for swelling andshrinkage, stresscrackformation andchanges in strength and hardness. Handling precautionsproduct safetyinformation required forsafe use is not included. Before handling, readproduct and safety datasheets and containerlabels for safe use,physical and healthhazard information. Thesafety data sheet isavailable from your localdow corning salesrepresentative. Usable life andstoragewhen stored at or below 20°c in theoriginal unopened containers, thisproduct has a usable life of 60 monthsfrom the date of production. Packagingthis product is available in differentstandard container sizes. Detailedcontainer size information should beobtained from your nearestdow corning sales office ordow corning distributor. Limitationsthis product is neither tested norrepresented as suitable for medical orpharmaceutical uses.
health andenvironmentalinformationto support customers in their productsafety needs, dow corning has anextensive product stewardshiporganization and a team of health,environment and regulatory affairsspecialists available in each area. For further information, pleaseconsult your local dow corningrepresentative. Warrantyinformation - pleaseread carefully

Additional Information:

• Production Capacity: AVAILABLE
• Delivery Time: WITHIN TWO DAYS
• Packaging Details: 1 KG

ABOVE PRICE IS INCLUDING GST 18%
Features & benefits • Wide service-temperature range (-40°C/-40°F to 200°C/392°F) • Excellent water resistance • Compatible with many plastics and elastomers • Low vapor pressure • Low volatility • Meets several global standards for water contact Composition • Silicone oil • Inorganic thickener Applications Lubrication for control and pressure plug valves, water softener and faucet valves. Sealant for vacuum and pressure systems and outdoor equipment (also shipboard) subject to washing and harsh environmental exposure, such as meters, electrical service entrance and underground connections. Damping medium for dash pots in electrical and electronic equipment. As an anti-stick and a sealant for transformer gasket and equipment enclosures – it prevents gaskets from sticking to metal and resists weathering and water washout. Also suitable for rubber and plastic O-rings, gaskets and seals. Certifications MOLYKOTE® 111 Compound meets several global standards for water contact, including NSF 51, NSF 61, FDA 21 CFR 175.300, Water Regulations Advisory Scheme Approval BS9260 (England), IPL Certificate of Conformity (France) and DIN-DVGW Examination certificate (Germany). How to use How to apply MOLYKOTE® 111 Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up; test prior to use. A thinner consistency can be achieved by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. MOLYKOTE® 111 Compound can then be applied by brushing, dipping or spraying. MOLYKOTE® 111 Compound should not be applied to any surface that will be painted or finished. Such coatings may not adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.Typical properties Specification writers: These values are not intended for use in preparing specifications. Please contact your local MOLYKOTE® sales representative prior to writing specifications on this product. Standard(1) Test Unit Result Color White to light gray; translucent ISO 2137 Penetration unworked mm/10 170 to 230 ISO 2137 Penetration; worked 60, max mm/10 260 CTM 0033A Bleed 24 hours/200°C (392°F), max % 0.5 CTM 0033A Evaporation 24 hours/200°C (392°F), max % 2.0 (1)ISO: International Standardization Organization. CTM: Corporate Test Method; copies of CTMs are available on request.Chemical resistance MOLYKOTE® 111 Compound is not greatly affected by mineral oils, vegetable oils or air. It is generally resistant to dilute acids and alkalines and to most aqueous solutions. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, it is recommended that the silicone compound be tested before adopting for regular use. MOLYKOTE® 111 Compound is not to be used with liquid oxygen and should not be used in applications requiring LOX compatibility. Handling precautions PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION.

Additional Information:

• Delivery Time: WITHIN WEEL
• Packaging Details: 1 KG

GST 18% EXTRA AT ACTUAL.

Lubricating grease for metal/metal, metal/plastic combinationsinvolving slow to mediumfastmovements and light load,especially over a wide range of temperaturesStandard* Units ResultAPPLICATION 1¨ Used successfully for rollers in mobile refrigerating equipment andrefrigerating plants, control cables, electric clocks, motors, windscreen wipermotors, vehicle starter motors, photographic and optical equipment, surveyinginstruments.
FEATURES¨ High oxidation resistanceWide service temperaturerange (73°C to +180°C)¨Good low-temperatureperformance¨¨ Compatible with many plastics¨ Water resistant
COMPOSITION¨ Silicone oil¨ Lithium soap
TYPICAL PROPERTIESSpecifications writers: These values are not intended for use in preparing specifications.Please contact Dow Corning GmbH, Wiesbaden, Germany before writing specifications onthis product.
The dye changes colour on standing. Thiscolour change does not affect theserviceability of the greaseColour PinkConsistency, density, viscosityDIN 51 818 NLGI consistency class 2ISO 2137 Worked penetration mm/10 260-300ISO 2811 Density at 20°C g/ml 1.0DIN 51 562 Base oil viscosity at 25°C mm²/s 100TemperatureService temperature °C 73to +180ISO 2176 Drop point °C 220ASTM- Low temperature torque test at -73°CD-1478-80Initial breakawaytorque Nm 164x10ª³Torque after 20 minutes running time Nm 22x10ª³Load-carrying capacityFour-ball tester (VKA)DIN 51 350 pt.4 Weld load N 1500Oil separationDIN 51 817 Standard test, 7 days at 40°C % 1.6* ASTM: American Society for Testing and Materials.ISO: International Standardisation Organisation
HOW TO USEHow to applyClean points of contact. As is usualwith lubricating greases, apply bymeans of a brush, spatula, orautomatic lubrication device. Can beused in central lubrication systems.
Do not mix with other greases.Because of the variation of plasticquality, compatibility tests should becarried out for swelling andshrinkage, stresscrackformation andchanges in strength and hardness.HANDLING PRECAUTIONSA Product Safety Data Sheet shouldbe obtained from your nearestDow Corning sales office prior to use.ATTENTION: Before handling, readproduct information, Product SafetyData Sheets and container labels forsafe use, and any physical and/orhealth hazard information.USABLE LIFE AND STORAGEWhen stored at or below 20°C in theoriginal unopened containers thisproduct has a usable life of 60 monthsfrom the date of production.Dow Corning will guarantee theusable life of this product until thedate indicated on the packaging. Thisdate is shown by the letters "EXP"(meaning Expiry) followed by 4digits, which stand for the month (lastday) and year. Example: "EXP 03/99"means use by 31 March 1999.PACKAGING INFORMATIONThis product is available in differentstandard container sizes. Detailedcontainer size information should beobtained from your nearestDow Corning sales office orDow Corning distributor.

Additional Information:

• Production Capacity: AVAILABLE
• Delivery Time: WITHIN TWO DAYS
• Packaging Details: 1 KG

Leveraging on our extensive market knowledge, we are providing a high-quality range of Fasto 1512 Moly Assembly Paste.

Other detail:

• The offered paste is processed by our adept professionals by using finest quality chemical compounds and sophisticated tools.
• Moreover, this paste is made available for our clients at nominal prices.
• Fasto 1512 is based on molybdenum disulphide, synthetic lubricant which provide long-term smooth lubricating action under extremes of loads and temperatures.
• It services as an assembly lubricant for high-precision, fine finished components and as an anti size compound for threaded connections.
• It also protects metal parts from rust and corrosion when subjected to humidity and corrosive atmosphere.

Additional Information:

• Item Code: Fasto-1512
• Delivery Time: within 3 to 4 days