Lube Adhesive & Engineering Co.

ABOVE PRICE IS INCLUDING GST 18%

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: 260 ML

ABOVE PRICE IS INCLUDING GST 18%.
SMART BOND -Neutral Silicone Sealants NP-120 TYPICAL PROPERTIES Uncured Specific Gravity- Translucent 0.94 ± 0.02(g/ml) Specific Gravity- White/ Black/ Grey/ Ivory 1.48+-0.02(g/ml)Colors Clear, White, Black, Grey, Ivory Flow, Sag or Slump NILSkin Formation Time (22°C / 50% R.H) 8-15min.Curing Rate (22°C / 50% R.H) 3mm / 24 hours Cured – Physical Elongation >300%Durometer Hardness, Shore A, points 20-35Tensile Strength, N/mm2 1.6-1.8Maximum Allowed Distortion 25%Service Temperature -50°C to +232°C DESCRIPTION NP-120 Neutral Non-Corrosiv e Industrial Silicone is a high performance, one component adhesive/sealant formulated for industrial and electrical applications. NP-120 remains permanently flexible, and exhibits excellent adhesion to a wide variety ofsubstrates. NP-120 suitable for gasketing application in gear box, engine and other industrial application. Good resistance with gasoline, engine oil, gear oil & water. BENEFITS • Non-Corrosive • Neutral cure/low odor • Medium modulus • Excellent adhesion to vinyl, wood, steel, aluminum, glass and plastic • VOC Compliant • Sealing electrical equipment • Bonding appliance parts • Permanently flexible • Waterproof Applying the Material – NP-120 Neutral Non-Corrosiv e Industrial Silicone is supplied ready-to-use. Under pressure it flows readily from itscontainer. The paste-like consistency makes it easy to work; a spatula or wooden paddle can be used for tooling the surface. The cure progresses inward from the surface. At conditions of at least 72°F (22°C) and 50 percent relative humidity, the sealant forms a tack-free skin in 30 minutes. Tooling is not practical after this skin forming begins and should be completed within 5- 10 minutes of application, even though this may require alternate periods of applying and tooling. Likewise, if masking tape has been used to mark o□ an area, it should be removed before the skinforms.LIMITATIONS: • Applications involving prolonged sub-mersion in water, including aquariums • Surfaces that require painting • Totally confined spaces, as sealant needs atmospheric moisture for curing • Structural glazing CLEAN UP Uncured sealant can be easily removed using a solvent such as alcohol or acetone. If the sealant is cured it must be removed mechanically by cutting and scraping. CAUTION: DIRECT CONTACT OF UNCURED SEALANT IRRITATES EYES AND MAY IRRITATE SKIN. OVEREXPOSURE TO VAPOR MAY IRRITATE EYES, NOSE, AND THROAT. Avoid eye and skin contact. Use with adequate ventilation. Do not handle contact lenses with sealant on hands. IN CASE OF EYECONTACT, flush eyes with water for 15 minutes. Obtain medical attention. IN CASE OF SKIN CONTACT, remove from skin and flush with water. KEEP OUT OF THE REACH OF CHILDREN. STORAGE AND SHELF LIFE: When stored in the original unopened containers at or below 80°F (27°C), NP-120 has a shelf life of 12 months from date of manufacturing. In Countries where high heat and humidity are a factor, special precautions must be taken. Store product in a covered, well-ventilated warehouse and avoid excessive heat conditions. Storage in high heat, high humidity conditions may reduce shelf life by up to 30%. Rotation of stock is an absolute necessity. Cartons should always be stacked upright with the nozzle tip pointed upwards. DO NOT stack cartons on their side. NEVER stack cartons more than 8 high. DO NOT store within 1 meter (4 feet) of roof line of the warehouse or storage building.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: 280 ML