Lube Adhesive & Engineering Co.

VITRORES : LIGHT CURABLE ADHESIVEVitrores is a single component light curable adhesive which sets in seconds on exposure to UV/sunlight.Vitrores is excellent for bonding glass to any substrate like glass, metal, ceramic, wood, rigid plasticsetc. & has excellent weather resistance, is non yellowing and give very high adhesion.Vitrores gel is UV/visible light curable, multi substrate bonder that exhibits excellent peel strength, thecure product is optically clear, exceptionally flexible and demonstrate outstanding elongation.Vitrores gel is recommended for applications where a tough, durable and moisture resistant bonding isrequired. Vitrores gel contains no acids, hazardous material or corrosive ingredients.PROPERTIES:Grade 605 201 GelAppearance Clear Clear Slight yellowViscosity cpsat 25°c20-80 600-800 1200 – 1500Setting timein sec10-15 1-5 25 – 30Bond gapIn mm0.0125-0.025 0.0125-0.025 0.0125 – 0.025Tensile strengthInkg/cm²140 / 100 150 / 90 70 – 80UV lamp 35-55mw/cm² intensity &300-400 wavelength(for HG lamp)do do DoSubstrates Glass to glass Glass to glass Glass to glassRecommended for Flat sheetbonding to beused for makingglass piller piller,handles, lensbonding etc.Edge to edgebondingBevelled piecepasting on flat glasssheetPacking 20gm,100gm,250gm, 1kg20gm,100gm,250gm, 1kg2gm, 10gm, 100gmSafety: UV curable adhesive may cause skin & eye irritation upon contact, use soap and plenty of waterat affected area.Storage: store in cool & dry place.

Additional Information:

• Delivery Time: within 2 days

ABOVE 100 GM PRICE IS 18% GST INCLUSIVE.
Fasto UV98E is a single component, general purpose,very low viscosity and economic grade UV adhesive thatcures to give a clear, flexible bond when exposed toUVA-light. It is especially suited for decorative glassbonding. The low viscosity of UV98E means it can wickinto preassembled parts.TYPICAL APPLICATIONSFasto UV98E is general purpose UV adhesive that hasbeen developed for bonding glass where non yellowing,transparent bonding is required.It is mainly developed for glass furniture industry wherehigher precision and transparency is required.PROPERTIES OF UNCURED MATERIALValueChemical type Urethane acrylic esterAppearance ClearSpecific Gravity 1.03Viscosity cPs1Typical Value 57Fixture Time2 (secs) 5Depth of Cure3 (mm) 2Compress Shear Strength4, N/mm2Glass 10Refractive Index 1.35Hardness ShoreD 48Shelf Life @ 21°C (months) 12Operating Temperature Range (°C)Continuous -50 to +110Intermittent -50 to +1301 Brookfield LVF, Spindle2 , 30rpm2 Glass slide fixture 10mW/cm2 @ 365 nm3 Cured for 30 secs @ 10mW/cm2 @ 365 nm4 Based on ASTM D2095-69, 180 secs cure @ 20mW/cm2
TYPICAL CURING PERFORMANCEGlass Slide Fixture Time in seconds, using Hg VapourLamp:10mW/cm2 <530mW/cm2 <3The rate of cure, depth of cure and surface tack of thecured adhesive will depend on the intensity of the UVlight, exposure time, and spectral output of the UV lightsource and light transmittance of the substrates to bebonded.Depths of cure up to 8mm can be achieved with highintensity lamps and long cure times. To achieve a fast,controlled, reproducible cure performance, the use ofhigh quality UV lamps is recommended.Cure Speed vs. IntensityFasto UV98E can be cured using sunlight. However, fora controlled, repeatable cure, UV lamps should be used.Cure speed vs. bond gapFasto UV98E is designed for bonding closely fitting glassand metal parts. UV98E can be used to a maximumdepth of ~3mm.CURING MECHANISMFasto UV98E is formulated to cure when exposed to UVradiation of 310nm or above.Chemical / Solvent ResistanceFasto UV98E exhibit excellent chemical resistance tomost oils and solvents including alcohols, methylatedspirit water. Fasto UV-curing adhesives are notrecommended for use in pure oxygen or chlorine lines.DIRECTIONS FOR USEFasto UV98E is very sensitive to UV-light. The adhesivesshould be applied to clean, dry parts. Ensure parts are
clean, dry and free from oil and grease. Apply adhesiveto one surface. Once the adhesive is applied, the partscan be positioned correctly and then exposed to UV-lightto initiate curing. Ensure that the entire bond is exposed.Product can be hand applied from the bottle.Dispensing systems are also available for high volumeassembly applications. Feed lines for the dispensingsystem must have black, UV-opaque tubing to avoidadhesive curing in the lines. Please contact your Fastorepresentative for further advice on dispensing solutions.GENERAL INFORMATIONFor safe handling of this product consult the MaterialSafety Data Sheet.StorageStore in a cool area and out of direct sunlight.Refrigeration to 5°C gives optimum storage stability.PackagingBottles: 100 g, 250 g and 1 kg. Available in bulk for usewith dispensing system.Please note: When packed an air space above theProduct is vital to maintain stability.DATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidanceonly. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user’s responsibility todetermine the suitability of any of the products and methods of use or preparation prior to use mentioned in

Additional Information:

• Delivery Time: WITHIN TWO DAYS
• Packaging Details: 100 GM 250 GM 1 KG

In order to cater the diversified demands of our clients, we have been able to provide a unique range of Fasto UV92 UV Adhesive.

Other detail:

• The entire range of adhesive is made up of premium quality chemical compounds and modular technology under the guidance of skilled professionals as per the set industrial norms.
• Moreover, this adhesive is widely used in various optical industries and medical technology field.
• Our offered adhesive is made available in various packaging options for our clients at affordable prices.
• Fasto UV92 is high performance, very high strength and very low viscosity UV adhesive.
• It wicks between parts to be bonded.
• It is suitable for bonding decorative and structural glass.

Features:

• High transparency
• Excellent stability
• Heat stability

Price:

Additional Information:

• Item Code: Fasto-UV92

In order to retain our goodwill in this industry, we are providing a qualitative array of Fasto UV98 UV Adhesive.

Other detail:

• This adhesive is processed by using supreme class chemicals with the help of latest technology under the guidance of skilled professionals. Additionally, the offered adhesive is made available as per the exact requirements of our valuable clients.
• Apart from this, the entire range of adhesive can be availed by clients at highly reasonable price.
• Fasto UV98 is medium strength and very low viscosity UV adhesive.
• It wicks between parts to be bonded.
• It is suitable for bonding decorative glass.

Price:

Additional Information:

• Item Code: Fasto-UV98

Keeping in mind the vast necessities of the patrons, we are engaged in providing a wide range of Fasto UV52 UV Adhesive.

Other detail:

Extensively used in various industries, the offered adhesive is even in difficult environmental conditions such as humidity and sunlight.This adhesive is processed using superior quality chemical compounds and sophisticated technology in compliance with industry standards. Moreover, our quality controllers test the entire range against various quality parameters.Fasto UV52 is high performance very high strength and high viscosity UV adhesive.It is suitable for bonding structural glass, decorative glass and metal to glass.

Price:

Pack sizePriceGst Extra250 gm290318%

Additional Information:

• Item Code: Fasto-UV52

By leveraging our extensive market knowledge, we provide the best quality assortment of Fasto UVM21 UV Adhesive.

Other detail:

• This adhesive is processed by using quality tested chemicals and sophisticated tools under the guidance of skilled professionals.
• Clients can avail this adhesive in bulk quantities to meet the exact requirements of the clients' specifications.
• Fasto UVM21 is high performance very and high strength medical grade UV adhesive.
• It is suitable for bonding various medical devices and grades of plastics like polycarbonate, acrylic, thermoplastics, etc

Price:

Additional Information:

• Item Code: Fasto-UVM21

Features:

• Very high strength
• Electronics grade
• Unsurpassed bonding strength
• Highly effective
• Accurate composition

Price:

 

Additional Information:

• Item Code: Fasto-UVE31